CRL Clear Plastic Desk Buttons

CRL Clear Plastic Desk Buttons

Item #:CP8

  • Almost invisible under glass
  • Easy to move
  • Used as cushions between
See Full Product Description

The product is already in wishlist!.

Sorry, an error has occured.



In stock
Ships same day





3/4" (19 mm)

Minimum Order

100 Each

Shipping Weight

0.16 oz (5g)


1/32" (.8 mm)

C.R. Laurence Clear Plastic Desk Buttons are used as cushions between glass and furniture tops. They can be easily moved or removed, because they have no adhesive. Clear Plastic Desk Buttons are 3/4 inch (19 mm) in diameter and 1/32 inch (.8 mm) thick. They are packed in boxes of 100 or 1,000. They are the most popular way to protect desk and table top surface. They are almost invisible under glass. NOTE: Because of the chemical reaction of some furniture finishes and polishes, we do not guarantee buttons against discoloration or deterioration.

From Manufacturer

  • The Most Popular Way to Protect Desk and Table Top Surfaces
  • Almost Invisible Under Glass
  • Easy to Remove

Use CRL Clear Plastic Desk Buttons as cushions between glass and furniture tops. They have no adhesive, so they can be easily moved or removed. Clear Plastic Desk Buttons are 3/4" (19 mm) in diameter and 1/32" (.8 mm) thick. Packed in boxes of 100 or 1,000.

NOTE: Because of the chemical reaction of some furniture finishes and polishes, we do not guarantee buttons against discoloration or deterioration.
Important Notes

Because of the chemical reaction of some furniture finishes, we do not guarantee protectors against discoloration or deterioration.




Most Recent | Highest Rated
Five Stars
They were exactly what I wanted. Fast shipping, too. Thanks!
- Deanna G. -
Glue was recommended for rug but went to open in and the top portion has hardened due to a leak. Returning.
- C. Smith -
Five Stars
Excellent :worked well
- jack nussbaum -
These are really thin - but they were perfect for the job.
These are really thin - 1 mm ( a penny is about 1.5mm - see comparison photo) I had my doubts they would give adequate clearance between the glass and the table-top, but they were perfect for the job. BUT I took off a star because unlike the image in the listing they came loose in a plastic baggie, rather than the cute little bin they were in the last time I bought them. ( I stacked them neatly inside the bag so I could measure the entire contents, rather than count them out - I can verify there were 100 of them)
- Dagobert -

Write a Review

Name* :

Where do you live? :

E-mail address* :

Review title* :

Rate this Product :

Review text* :

Captcha :

Reload code

Email Address :

First Name :

Last Name :

Company :

Zip Code :

Contact Phone :

Comments :

Part Number :

Item Title :

Qty :

Color :

Size :


Shipping Policy

Our main office and largest warehouse located in South Florida, but we also have several shipping warehouses throughout United States.  It enables us to deliver orders to our customers as fast as possible at discounted rates.

Our Shipping Locations:

Miami, Florida
Orlando, Florida
Los Angeles, California
San Diego, California
San Francisco/Oakland (Union City), California
Atlanta, Georgia
Boston (Taunton), Massachusetts
Chicago (Elgin), Illinois
Cicero, Illinois
Cleveland (Solon), Ohio
Dallas, Texas
Denver, Colorado
Houston, Texas
Las Vegas, Nevada
New York Area (Secaucus, New Jersey)
Philadelphia Area (Moorestown, New Jersey)
Phoenix, Arizona
Seattle (Kent), Washington


We offer Standard (UPS or USPS) and Express (UPS Overnight) shipping options. Each option offers a different delivery date. However, all options require time to process the order before shipping. We pride ourselves on fast shipping and will make our best to ship your item within 48 hours. For larger orders, we might be able to have the item(s) shipped via common carrier.


We do ship to APO/FPO addresses. You must select "Standard Shipping” during the Checkout process.


We calculate shipping charges by the weight and size of the item. To determine your shipping costs for an item(s), simply add the item to the Shopping Cart. The shipping charges will be displayed in the Shopping Cart before any credit card information is required. Don't worry about adding items to the Shopping Cart - you can remove them at any time.

Please be informed that $4.99 packaging and handling fee will be added to the orders that are less than $50.00. If your product requires cutting, $7.00 cut cutting fee will be added to the items that require cutting.

Long items will cost more to ship than the quoted price and shipping fee will be adjusted accordingly to reflect the actual shipping price charged by the courier. Reason: long items are shipping according to dimensional weight instead of actual weight of the product

Return Policy

We accept returns up to 30 days


Receiving agent (Customer) must communicate with DK Hardware Supply within 3 days of receiving the order for us to process shipping damage claim with respective carrier in timely matter.

All shipments shall be checked thoroughly for damage at receiving before accepting and especially before signing on the carrier's delivery paperwork.

Upon freight shipment being signed for acceptance, it becomes a binding document as to the condition of the products on delivery. We cannot process any shipping damage claim, if you accept the delivery by signing such documents.

If damage is found at delivery, both you and the delivery driver must make notes on BOL or other paperwork detailing the found damage, description of damage, time/date, your name, contact phone, etc. on the delivery documents. Make a copy of the marked BOL or any other documents presented by carrier.

If refusal of the shipment is needed due to severe damage, DO NOT sign the delivery carrier's BOL document indicating that you accept the delivery and/or just refuse the package.

Take pictures showing the damage, before the delivery driver leaves. Contact DK Hardware Supply reporting the damage by forwarding the marked BOL copy, any other documents and pictures.

The RMA process – four easy steps

1. Create an RA number.

Your product must be returned with an RA (Return Authorization) number so we can identify it. You can obtain an RA number by either calling 877-509-8040 or 1-954-556-6667 or via email All returns must be authorized by the Returns Manager & 20% - 25% restocking charge will apply to stock items. All return shipping charges have to be paid by customer and no shipping or handling charges credit allowed. Original Shipping charges are not refundable.

2. Send the product to DK Hardware Supply.

We advise to ship your items with delivery confirmation. Please note that we are not responsible for your return shipping charges.  Please ship the merchandise to:

DK Hardware Supply
RMA# _________
208 NW 6th Ave
Hallandale Beach, FL 33009
3. Your RMA is received and approved.

Please allow 3-5 business days from the time we receive your shipment to review and approve your RA. If you would like to know the status of your RA, it is best to email or call.

4. Refund.

Once your RA is received at our warehouse and approved, please allow 3-5 business days for refund to appear on your account.  In rare circumstances, the returned product will require manufacturer’s inspection and delay RMA approval.  We will contact you in case there is a delay. 

Please note special conditions for returned merchandise and non-returnable items:

  • We charge restocking fee to encourage customers to purchase products they intend to keep. Items returned up to 14 days are subject to 20% restocking fee. Items returned between 14-30 days are subject to 25% restocking fee.
  • Power tools, including but not limited to electric, pneumatic and mechanic may not be returned for credit or refund. Power tools are guaranteed by their manufacturers, and any returns for credit due to manufacturing defects or workmanship should be handled through the warranty department of the tool's manufacturer. You can find the manufacturer contact information in your product manual, in the item listing, on the manufacturer's website or it can be obtained by calling us or email to
  • Wood's™ Products including but not limited to Ladder Lifters, Lift Arms, Lift Frames , Tilters, rotators and Adaptation Device are not returnable and considered a "Final Sale" as they are considered a special order items. Orders that include these items cannot be canceled once this order/quote has been Processed
  • Custom made Items, Cut materials, Altered therefore not a stock item, large volume orders, special priced items, Special quoted items, special order items are considered a "FINAL SALE" and these items cannot be returned or canceled once this order/quote has been Processed.
  • No returns are accepted for the custom made orders or product which shelf’s life has expired. All returned products will be thoroughly inspected and a determination will be made if eligibility and conforming requirements are met. Please verify the product you are returning meets the below guidelines and qualifies for return to avoid any delay in, or denial of, processing your return.

Product Inspection Criteria

  • Products that are labeled with a security seal must have the seal intact and not tampered with.
  • Products must be in the original manufacturers packaging, and shipped securely.
  • Products must be complete with any standard certification labels (UL listing, capacity, brand name, UPC code) originally placed and not tampered with.
  • Products must be free from damage of any type, including, but not limited to dents, scratches, cracks, abuse, defacement or indication of removed screws/fasteners or seals.
  • Product serial number, or any similar identification numbers, must match the serial number on the package or invoice (DK Hardware Supply maintains serial number tracking).