Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
See reviews See
reviews
Replaced With
The item is currently out of stock and it may or may not be restocked
OUT OF STOCK
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
- Conductive Two-Part Adhesive
- Easy-to-Use Two-Part Conductive Adhesive for the Repair of Rear Defroster Power Tabs
- Full Cure in 24 Hours or Less
Contents
0.5 oz (14 g)
Type
Rear Defroster Connection Kit
The CRL Rear Defroster Connector Repair Kit is easy to use. Just mix equal parts of Part A Epoxy with Part B Hardener and apply with the reusable applicator stir stick. Apply the connector tab and keep immobilized for less than 10 minutes. Full cure will be obtained in 24 hours or less depending on temperature and thickness of material. Always use a minimal amount for fastest cures. Important Notes: It is important that this material cure for over 24 hours 77° and above prior to applying power to the tab. Material can be heated to accelerate the cure (149° TO 248°) for 10 minutes.kit.html DS 07/25/2016
From Manufacturer
The CRL Rear Defroster Connector Repair Kit is easy to use. Just mix equal parts of Part A Epoxy with Part B Hardener and apply with the reusable applicator stir stick. Apply the connector tab and keep immobilized for less than 10 minutes. Full cure will be obtained in 24 hours or less depending on temperature and thickness of material. Always use a minimal amount for fastest cures.
Important Notes
Important Notes
It is important that this material cure for over 24 hours 77° and above prior to applying power to the tab. Material can be heated to accelerate the cure (149° TO 248°) for 10 minutes.