Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
CRL 752 Series Seven Spindle Beveller/Edger
Item #: 752 by CR Laurence
See reviews See
reviews
The item is currently out of stock and it may or may not be restocked
OUT OF STOCK
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
- Combination Beveling and Edging Machine
- Engineered for Shops with Limited Fabrication Space
- Includes 12 Month Warranty
Height
8'-1" (2.46 m)
Depth
8' (2.4 m)
Width
24" 1" (7.3 m)
This CRL Beveller/Edging Machine is a space saving combination machine, designed to provide quality beveling and polished edgework utilizing limited factory space. Model 752 is noted for premium quality, straight-line bevels on glass up to 1" (25 mm) thick. It will produce 1/2" (12 mm) height bevels at 65" (1.6 m) per minute or 1" height bevels at 30" (762 mm) per minute. Ground and polished edgework is also possible on glass up to 1/2" (12 mm) thick. Both models of Somaca/CRL's Seven Spindle Bevellers feature easy-to-use digital controls for selecting glass thickness, bevel height and bevel angle. Bevel calculation and set-up is accomplished in seconds. You also have the ability to store up to 15 different bevel settings, and recall them instantly. The computer controls are also able to determine a bevel angle based on the final edge thickness required. The operator can adjust the controls to read in inch or metric units of measure. This control will also track productivity - it records the total inches of glass processed and the corresponding hours of labor on user counters which can be reset. The bevel and edge spindles have individual ammeters to monitor wheel performance. The system's microprocessor and motor starters are located in a remote cabinet to minimize vibration to components.
Wheel Stations: Featuring 3HP, 3600 rpm spindle assemblies for all beveling positions, and the edge grind position. The edge polish station on Model 752 uses a 2HP, 1800 rpm spindle assembly. All wheel adjustments are located on the front of the machine.
Conveyor: The glass is conveyed by means of a flexible conveyor. Both entry and exit conveyors are 7' (2.1 m) long. Conveyor speed is variable from 0 to 157" (4 m) per minute by push button adjustment.
Capacities:
Bevel size and angle: 0- 2" (0 to 50.8 mm) height, 3 - 45 degrees.
Bevel capacity: 1/8" to 1" (3 to 25 mm) thick glass.
Edge capacity: 1/8" to 1/2" (3 to 12 mm) thick glass.
Minimum glass size: from 1-5/8" x 1-5/8" (41.2 x 41.2 mm) and strips from 1-3/8" (35 mm) wide with 3/8" (10 mm) bevel.
Power requirement: 70 amps @ 230 volt, 3 phase power.
NOTE Model 752 can be converted to a 761 High Speed Beveller, if you find that your needs have changed. This saves you the cost of trading-in or selling your in-place equipment to increase production.
Wheel Stations: Featuring 3HP, 3600 rpm spindle assemblies for all beveling positions, and the edge grind position. The edge polish station on Model 752 uses a 2HP, 1800 rpm spindle assembly. All wheel adjustments are located on the front of the machine.
Conveyor: The glass is conveyed by means of a flexible conveyor. Both entry and exit conveyors are 7' (2.1 m) long. Conveyor speed is variable from 0 to 157" (4 m) per minute by push button adjustment.
Capacities:
Bevel size and angle: 0- 2" (0 to 50.8 mm) height, 3 - 45 degrees.
Bevel capacity: 1/8" to 1" (3 to 25 mm) thick glass.
Edge capacity: 1/8" to 1/2" (3 to 12 mm) thick glass.
Minimum glass size: from 1-5/8" x 1-5/8" (41.2 x 41.2 mm) and strips from 1-3/8" (35 mm) wide with 3/8" (10 mm) bevel.
Power requirement: 70 amps @ 230 volt, 3 phase power.
NOTE Model 752 can be converted to a 761 High Speed Beveller, if you find that your needs have changed. This saves you the cost of trading-in or selling your in-place equipment to increase production.