Roll over image to zoom in
Product Overview
Related Videos
Reviews
Questions & Answers
CRL CRL9EP EPDM/PVC Primer for CRL900 and CRL700 Series Urethanes
Item #: CRL9EP by CR Laurence
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
- For Use with Rigid and Semi-Rigid EPDM and PVC Encapsulated Parts
- Part of the LYNX Services Program
- 24 Page Technician Training Manual
CRL9EP EPDM/PVC Primer is used with rigid and semi-rigid EPDM/PVC encapsulated parts. New encapsulated parts require a primer for OEM bonding strength when urethane is being bonded to the encapsulation rather than to the glass. Cleaning and Primers
CRL 900 and 700 Series Urethanes are supported by a selection of primers formulated for use in all aspects of glass bonding, including a glass frit primer, a pinchweld primer, and a primer specifically formulated for use with EPDM/PVC moldings.
1. After removing all of the old urethane to within 1/16 inch (1.5 millimeter) of the pinchweld, prepare the pinchweld following the procedures outlined in the CRL Technicians Training Manual. Prime these areas with CRL9P Pinchweld Primer.
2. Clean the inside of the windshield with a lint-free towel 1550 and PWR22 Automotive Glass Cleaner.
3. Apply CRL9GC Glass Primer to frit area with a lint-free towel and wipe dry. Allow to flash off for a minimum of 10 minutes, but no more than 8 hours before installing adhesive. This procedure must be performed above 40 DegreeF (4 DegreeC). NOTE: CRL9GC Glass Primer must be used prior to any adhesive application to prevent glass displacement. Failure to do so may result in personal injury or property damage.
4. Apply CRL9EP EPDM/PVC Primer to encapsulated moldings if they are part of the bonding area.