RECENTLY VIEWED
Skip to main content
CRL Metal Tube Drills are designed for use in our CRL Tripod Drill or similar type drill machine. They work with an abrasive grain such as CRL Silicon Carbide Grain to "drill" holes in glass through rotational abrasion. A coolant (or water) is mixed with the abrasive to form a slurry which is retained by a CRL Rubber Base Drilling Ring. The even and steady rotation of the Tube Drill against the glass will produce a clean hole with minimal breakage or chipping. CRL Metal Tube Drills are the economical fulfillment of your glass drilling needs. They have a 1/4" (6.4 mm) diameter shank to fit most drilling machines.
NOTE: Always wear the proper safety gear including eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Cat. No. GF1 Ground Fault Circuit Interrupt Device must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Product Warning:
Always wear the proper safety gear including eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
CRL STD214 2-1/4" Metal Tube Drill
Item #: STD214 by CR Laurence
See reviewsSee reviews
QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
- One Piece Construction Gives Rigidity and Durability
- The "Old Reliable" Way to Drill Glass
Shipping Weight
1 lb (454g)
Drill Diameter
2-1/4" (57.2 mm)
Material
Steel
Diameter
2-1/4 Inches
Type
Metal Tube
Shank Diameter
1/4
Shank Type
Round
Wrist Circumference
2-1/4 in. (57 mm)
Product Overview
CRL Metal Tube Drills are designed for use in our CRL Tripod Drill or similar type drill machine. They work with an abrasive grain such as CRL Silicon Carbide Grain to "drill" holes in glass through rotational abrasion. A coolant (or water) is mixed with the abrasive to form a slurry which is retained by a CRL Rubber Base Drilling Ring. The even and steady rotation of the Tube Drill against the glass will produce a clean hole with minimal breakage or chipping. CRL Metal Tube Drills are the economical fulfillment of your glass drilling needs. They have a 1/4" (6.4 mm) diameter shank to fit most drilling machines.
NOTE: Always wear the proper safety gear including eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Cat. No. GF1 Ground Fault Circuit Interrupt Device must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Product Warning:
Always wear the proper safety gear including eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.