RECENTLY VIEWED
Skip to main content
CRL Habit Fit TPM and TPE Series Diamond Drills are commonly used for glass drilling throughout Europe and Australia. They are especially suited for high production equipment and have an extended work life.
CRL TPM Series Metal Bond Diamond Drills use a special 3/8" (10 mm) diamond and brass bond for maximum performance in glass. Metal Bond Drills offer the greatest life, with an expectancy of 1000 to 2000 holes in 1/4" (6 mm) glass with proper maintenance. These multi-layer drills run cooler than any other drill on the market.
CRL TPE Series Electro-Formed Diamond Drills are thin-walled, with a 1/2" (12.7 mm) deep layer of diamonds and bonding matrix designed for high speed, high production drilling. These drills are fragile, and are intended for the drilling of flat (plate) glass ONLY, in a true running production-type drilling machine. These drills offer superior results when exacting conditions are met.
Sharpening or "dressing" of these drills periodically will substantially increase their cutting capabilities and minimize "glazing" or dulling of the bit. A Dressing Stone is a recommended necessity when working with an Electro-Formed or Metal Bond Diamond Drill.
IMPORTANT NOTES: These Drills are designed for use in a true running production-type drilling machine. NEVER use in any type of hand drill. The use of these Drills in any manner other than as specified above may damage them and will void any warranty.
Product Warning:
Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. Always wear the proper safety gear, including gloves and eye protection, when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupt Device (Cat. No. GF1) must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
See reviewsSee reviews
HURRY! Low in stock
$73.85
/eachSAVE UP TO 7.38
Buying in bulk
QUICK SHIPPING*Usually ships in 1 business day
QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
- For Fast Cutting, High Production Runs
- Long Lasting Reliability
Diameter
26 mm
Drill Diameter
26 mm
Style
TPM Series
Diameter (mm)
26
Product Overview
CRL Habit Fit TPM and TPE Series Diamond Drills are commonly used for glass drilling throughout Europe and Australia. They are especially suited for high production equipment and have an extended work life.
CRL TPM Series Metal Bond Diamond Drills use a special 3/8" (10 mm) diamond and brass bond for maximum performance in glass. Metal Bond Drills offer the greatest life, with an expectancy of 1000 to 2000 holes in 1/4" (6 mm) glass with proper maintenance. These multi-layer drills run cooler than any other drill on the market.
CRL TPE Series Electro-Formed Diamond Drills are thin-walled, with a 1/2" (12.7 mm) deep layer of diamonds and bonding matrix designed for high speed, high production drilling. These drills are fragile, and are intended for the drilling of flat (plate) glass ONLY, in a true running production-type drilling machine. These drills offer superior results when exacting conditions are met.
Sharpening or "dressing" of these drills periodically will substantially increase their cutting capabilities and minimize "glazing" or dulling of the bit. A Dressing Stone is a recommended necessity when working with an Electro-Formed or Metal Bond Diamond Drill.
IMPORTANT NOTES: These Drills are designed for use in a true running production-type drilling machine. NEVER use in any type of hand drill. The use of these Drills in any manner other than as specified above may damage them and will void any warranty.
Product Warning:
Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. Always wear the proper safety gear, including gloves and eye protection, when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupt Device (Cat. No. GF1) must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.