3M 30472 334U Series Multi-Hole Clean Sanding Abrasive Disc, 5 in Dia, P500 Grit, Hook and Loop, Purple

Our 3M™ Hookit™ purple clean sanding abrasive disc 334U combines excellent dust removal and fast cutting, long-lasting abrasive for higher productivity and lower cycle times. A spiral pattern clears dust from the surface and reduces loading for longer disc life - up to 3X longer than traditional auto body abrasive discs. Our 3M™ Hookit™ attachment system makes disc change outs fast and easy.
3M Hookit coated hook & loop disc uses aluminum oxide as the abrasive material and has a diameter of 5 in. 3M incorporates this aluminum oxide material into the hook & loop disc forming a grit of P500. This product is on a paper backing, C weight.
Specifications:

Abrasive Type: Coated

Specification parameters description:

Grade:
Grade is a measurement of the size of abrasive particles embedded in coated abrasives. It is a more general measurement of the level of precision, and corresponds roughly to grit. A smaller grit number means larger particles and a coarser grade, while high number grits are used for finer work.
Abrasive Material:
Values: A/O Aluminum Oxide AO A/Z Alumina Zirconia AZ S/C Silicon Carbide SC Aluminum Oxide Aluminum oxide is an artificial abrasive suited for general purpose stock removal and finishing. It is the mostly commonly used abrasive and can be used for most steels and ferrous alloys. Aluminum oxide is slightly softer but tougher than silicon carbide. Ceramic Ceramic is used for aggressive cutting and grinding of stainless steel, titanium, and metal alloys. The abrasive grain is designed to fracture during use so that it maintains sharpness. Ceramic Aluminum Oxide Cerium Oxide Cerium oxide is used for fine polishing and lapping of glass, gemstones, optical mirrors, and lenses. It should be used wet or in slurry form. Diamond Diamond can be either natural or manufactured and is one of the hardest abrasive materials. It is commonly used for grinding and polishing stone and very hard steels, and for sharpening other cutting tools. Nylon Silicon Carbide Silicon carbide is a manufactured material that is extremely hard but brittle. It is commonly used for fast cutting under light pressure, particularly on cast iron, nonferrous metals, and materials such as glass and plastic. Precision Shaped Ceramic Grain Zirconia
Backing Weight:
Paper and cloth have a lettering scale for backing weight that measures strength of the material onto which the abrasive is mounted. Paper uses the letters A-F, where A is a lighter weight and most flexible and F represents a rigid, heavier backing. Lighter backings are typically paired with finer abrasive grits, suitable for blending and finishing. Coarser grits used for deburring and stock removal rely on a heavier backing. Cloth uses a lettering system of J, X, and Y for backing weight. J weight (jeans) is the lightest and most flexible, X weight (drills) is more durable and recommended for medium duty work, and Y weight is the toughest and least flexible. Fiber backings are made from chemically-impregnated paper to form a very hard, strong backing material. Fiber is used primarily for sanding discs. Polyester film backing provides high strength with a very thin backing and is used for very fine grits. It is more tear resistant than paper backing and is also waterproof.
Grit:
Grit is a measurement of the size of abrasive particles embedded in coated abrasives. The most common standards for grit size are the United States CAMI (Coated Abrasive Manufacturers Institute) and the European FEPA (Federation of European Producers of Abrasives). A smaller grit number means larger particles and a coarser grade, while high number grits are used for finer work. Grit is generally a unitless measure but is sometimes measured in microns.