48" Category One Safety Backing Tape

Roll over image to zoom in

CRL 1MT48 48" Category One Safety Backing Tape

Item #: 1MT48 by CR Laurence

See reviews See reviews
The item is currently out of stock and it may or may not be restocked
OUT OF STOCK

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

Linear Feet per Roll

600 ft (183 m)

Shipping Weight

50 lb (22.68kg)

Width of Tape

48 in (1219 mm)

Category One Tape is a tough, impact resistant white plastic film that is specifically designed as a safety backing for mirrors and decorative mirror paneling. The film is coated with a very aggressive, acrylic pressure-sensitive adhesive that bonds with a variety of mirror backing and glass surfaces. The tape is easily applied from the roll. In compliance with ANSI Z97.1 1975 UCB for impact resistance.
Physical Properties:
Film: Polyethylene
Tensile Strength (P.S.I.): 6
Elongation (%): 550
Thickness: 4 mil (.004") º± .0005%
Adhesive: Acrylic water based
Adhesion: 24 oz. º± 4 oz. per inch of width
Peel Adhesion: *16 oz.
*"PSTC-1" initial tack on stainless steel
Application Instructions: For best results, tape should be applied with pressure roller application. Surface should be clean and free of oil and moisture. Apply at temperatures between 60 and 100 degrees Fahrenheit (16 and 38 degrees Celsius).
Mastic Application:
Regular Palmer Mirro-Mastic and CRL Heavy Bodied Mastic may be used with Category II Safety Tape only, not Category I Safety Tape, that has been washed with 70 percent isopropyl alcohol (Rubbing Alcohol). Palmer Qwikset Mirro-Mastic,Gunther Extra/Build, or Gunther Ultra/Bond are NOT to be used with plastic safety film. Category I Safety Tape must have holes cut-out of it where the pats of mastic will be applied. Mastic will not adhere to Category I Safety Tape.