RECENTLY VIEWED
Skip to main content
The special sawtooth design of CRL Amazing Glazing Plated Diamond Drills reduces the contact area, allowing better grinding action and increased coolant penetration. They are perfect for use in portable tripod and cup style machines. Our most durable drill has been machined from solid steel. Use with DTC80 Diamond Tool Coolant and submerge in a retaining ring for best results. Although plated, these drills may be sharpened one time with a CRL Sharpening Stone after they are totally worn out to expose some of the remaining diamonds. This will extend their work life for a period of time.
NOTE: Always wear the proper safety gear, including eye protection, when drilling glass. Work should be performed on a flat, horizontal surface. A Cat. No. GF1 Ground Fault Circuit Interrupt Device is recommended when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Product Warning
NEVER perform any type of freehand drilling. The use of a hand drill requieres a stabilization base such as a our GDB1 & GDB2 Glass Drilling Bases. Extreme care and caution should be used as the use of these drill in any other manner other than as specified may damage the bit and void warranty.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
CRL AG58 5/8" Amazing Glazing Plated Diamond Drill
Item #: AG58 by CR Laurence
See reviewsSee reviews
QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
- Diameters from 1/8" to 4-1/2" (3.2 to 114.3 mm)
- Our Most Durable Plated Drill
- Unique, Aggressive Sawtooth Profile
Recommended RPM
1400 - 1600
Drill Diameter
5/8" (16 mm)
Drill Bit Size
5/8
Profile
Sawtooth
Shank Type
Reduced Round
Drill Bit Material
Diamond Plated
Diameter
5/8 Inch
Material
Diamond Plated Steel
Shank Diameter
3/8
Wrist Circumference
5/8 in. (16 mm)
Product Overview
The special sawtooth design of CRL Amazing Glazing Plated Diamond Drills reduces the contact area, allowing better grinding action and increased coolant penetration. They are perfect for use in portable tripod and cup style machines. Our most durable drill has been machined from solid steel. Use with DTC80 Diamond Tool Coolant and submerge in a retaining ring for best results. Although plated, these drills may be sharpened one time with a CRL Sharpening Stone after they are totally worn out to expose some of the remaining diamonds. This will extend their work life for a period of time.
NOTE: Always wear the proper safety gear, including eye protection, when drilling glass. Work should be performed on a flat, horizontal surface. A Cat. No. GF1 Ground Fault Circuit Interrupt Device is recommended when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Product Warning
NEVER perform any type of freehand drilling. The use of a hand drill requieres a stabilization base such as a our GDB1 & GDB2 Glass Drilling Bases. Extreme care and caution should be used as the use of these drill in any other manner other than as specified may damage the bit and void warranty.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.