RECENTLY VIEWED
Skip to main content
This CRL 8B Series Square Base Shoe is the same profile as our standard B7S Series, but it is 30% lighter, which means it is more price competitive, environmentally friendly, and will reduce your shipping costs. Designed to work with CRL's patented TAPER-LOC System, 8B can be easily cut to the required length using a chop saw with a minimum 10" (254 mm) saw blade for aluminum.
Product Warning:
CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method.
All pre-drilled CRL Base Shoes have a +1/8 (3 mm)/-1/16 (1.5 mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
CRL 8B34D 8B Series Mill Aluminum 120" Square Base Shoe Drilled for 3/4" Glass
Item #: 8B34D by CR Laurence
See reviewsSee reviews
QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
- 30% Lighter Than CRL's Traditional B7S Series Shoe
- Designed and Engineered for Glass Railing and Windscreen Applications
- For Use with 3/4" (19 mm) Monolithic Tempered Glass Undrilled Base Shoe
- Easily Cut to Length Using Your Chop Saw
- CRL Glass Railing Systems Meets NBC Load Requirements When Installed in Accordance to ICC-3269
Shipping Weight
60 lb (27.22kg)
Length
120
Type
Base Shoe Drilled
Height
4-1/8
Finish
Mill
Material
Aluminum
Width
2-3/4
Glazing Thickness
3/4
Glazing Type
Monolithic
Drilling Center to Center
12
Finish/Color
Mill
Glass Included
No
Product Overview
This CRL 8B Series Square Base Shoe is the same profile as our standard B7S Series, but it is 30% lighter, which means it is more price competitive, environmentally friendly, and will reduce your shipping costs. Designed to work with CRL's patented TAPER-LOC System, 8B can be easily cut to the required length using a chop saw with a minimum 10" (254 mm) saw blade for aluminum.
Product Warning:
CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method.
All pre-drilled CRL Base Shoes have a +1/8 (3 mm)/-1/16 (1.5 mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.