CRL 9542 Black 10.3 Fl. Oz. Insulating Glass Silicone Sealant

CRL Insulating Glass Silicone is a neutral cure silicone glass sealant ideally designed for producing long lasting insulating glass units when used with a primary seal of poly isobutylene. Gives excellent glass to glass adhesion because of the presence of adhesion promoting adhesives. It is available in easy –to –use 10.3 fl. oz. (305 ml) cartridges or 52 gallon drums for bulk dispensing. It is a black color product. Tack-free time is 30 minutes; fully cures 1/8" (3 mm) thickness in 24 hours. Units may be cautiously moved after 24 hours. Full strength is obtained in seven days. CRL Black 10.3 Fl. Oz. Insulating Glass Silicone Sealant has a functional temperature range of -80°F to 400°F (-62°C to 204°C) and is resistant to UV and extreme weather conditions. Technical data: Meets or exceeds Federal Specifications TT-S-1543A, Class A (COM-NBS) for silicone building sealants; TT-S-00230C, Class A (COM-NBS) for one-component silicone sealants; ASTM C-920 for elastomer joint sealants, Type S, Grade NS, Class 25, Use NT, G, A; CGSB 19GP-13. Important Notes Recommended for dual seal units only with Poly isobutylene (PIB) Tape as the primary seal. DS 06/27/2016

From Manufacturer

CRL Insulating Glass Silicone is a single component, neutral cure silicone glass sealant specifically designed for producing long lasting insulating glass units when used with a primary seal of polyisobutylene. It contains adhesion promoting additives for excellent glass-to-glass adhesion, and is resistant to ultraviolet light and weather extremes. It has a functional temperature range of -80°F to 400°F (-62°C to 204°C).
It is available in easy-to-use 10.3 fl. oz. (305 ml) cartridges or 52 gallon drums for bulk dispensing. This product is black in color. Tack-free time is 30 minutes; fully cures 1/8" (3 mm) thickness in 24 hours. Units may be cautiously moved after 24 hours. Full strength is obtained in seven days.
TECHNICAL DATA: Meets or exceeds Federal Specifications TT-S-1543A, Class A (COM-NBS) for silicone building sealants; TT-S-00230C, Class A (COM-NBS) for one-component silicone sealants; ASTM C-920 for elastomer joint sealants, Type S, Grade NS, Class 25, Use NT, G, A; CGSB 19GP-13. Important Notes: Recommended for dual seal units only with Polyisobutylene (PIB) Tape as the primary seal. Check cartridge label and Specification Data Sheet for additional limitations.