RECENTLY VIEWED
Skip to main content
CRL Narrow Floating Headers with Walking Beam Top Pivots work with CRL PH20 and PH21 Series Top Door Patch Hardware Fittings, and with all CRL 1/2" (12 mm) Heavy Glass Door Rails. When used with CRL Door Rails you get an even sight line, as the width of the Narrow Header matches the width of the Door Rail. For use with Free-Swinging Bottom Pivots or Floor Closers, Standard Narrow Floating Headers with Walking Beam Top Pivots are fabricated for use in 1/2" (12 mm) glass-to-glass configurations. Custom lengths, glass-to-wall configurations, and Floating Headers for offset pivots are also available.
For more information, contact DK Hardware Sales at Department.
Application Tip: When trying to show the maximum amount of glass, but still looking for the security of a magnetic shear lock, the CRL Narrow Floating Header offers that functionality.
Stock Narrow Floating Headers: For 1/2" (12 mm) glass-to-glass installations, with CRL9040WBP Walking Beam Top Pivots.
Product Warning:
STRUCTURAL DISCLAIMER - All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures.
Length and installation type must be specified when ordering. If the weight of the transom above the header exceeds 100 pounds (45.4 kg) the transom will need to be supported from the ceiling to take weight off of the header and prevent bowing. The customer can use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact Technical Sales.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
CRL NFH4DUS Black Bronze Anodized Single Narrow Floating Header with Surface Mounted Top Pivots - for 36" Wide Opening
Item #: NFH4DUS by CR Laurence
Item Discontinued!See reviewsSee reviews
The item is currently out of stock and it may or may not be restocked
OUT OF STOCK
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
- Use Monolithic Tempered Glass
- Creates an Even Sight Line When Used with CRL Door Rails
- For 1/2" (12 mm) Tempered Glass Only
- Six Standard Architectural Finishes
- Stock Single 36" (914 mm) and Double 72" (1.83 m) Headers, with Custom Sizes Available
- Supported by Glass Side Panels
Height
1-5/8
Width
4
Length
36" (914 mm)
Size
1-7/8" x 1-5/8" (48 x 41 mm)
Overall Size
1-7/8" x 1-5/8" (47 x 41 mm)
Finish
Black Bronze Anodized
Configuration
Glass To Glass
Glazing Thickness
1/2
Finish/Color
Black Bronze Anodized
Product Overview
CRL Narrow Floating Headers with Walking Beam Top Pivots work with CRL PH20 and PH21 Series Top Door Patch Hardware Fittings, and with all CRL 1/2" (12 mm) Heavy Glass Door Rails. When used with CRL Door Rails you get an even sight line, as the width of the Narrow Header matches the width of the Door Rail. For use with Free-Swinging Bottom Pivots or Floor Closers, Standard Narrow Floating Headers with Walking Beam Top Pivots are fabricated for use in 1/2" (12 mm) glass-to-glass configurations. Custom lengths, glass-to-wall configurations, and Floating Headers for offset pivots are also available.
For more information, contact DK Hardware Sales at Department.
Application Tip: When trying to show the maximum amount of glass, but still looking for the security of a magnetic shear lock, the CRL Narrow Floating Header offers that functionality.
Stock Narrow Floating Headers: For 1/2" (12 mm) glass-to-glass installations, with CRL9040WBP Walking Beam Top Pivots.
Product Warning:
STRUCTURAL DISCLAIMER - All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures.
Length and installation type must be specified when ordering. If the weight of the transom above the header exceeds 100 pounds (45.4 kg) the transom will need to be supported from the ceiling to take weight off of the header and prevent bowing. The customer can use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact Technical Sales.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.