{"id":12274,"date":"2026-10-13T06:17:01","date_gmt":"2026-10-13T06:17:01","guid":{"rendered":"https:\/\/www.dkhardware.com\/blog\/?p=12274"},"modified":"2026-10-15T09:01:16","modified_gmt":"2026-10-15T09:01:16","slug":"5-bullet-proof-materials-used-in-commercial-buildings","status":"publish","type":"post","link":"https:\/\/www.dkhardware.com\/blog\/5-bullet-proof-materials-used-in-commercial-buildings\/","title":{"rendered":"5 Bullet Proof Materials Used in Commercial Buildings"},"content":{"rendered":"\t\t<div data-elementor-type=\"wp-post\" data-elementor-id=\"12274\" class=\"elementor elementor-12274\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-126d3ab e-flex e-con-boxed e-con e-parent\" data-id=\"126d3ab\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-195ca10 elementor-widget elementor-widget-text-editor\" data-id=\"195ca10\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<span style=\"font-weight: 400;\">No building material stops every firearm threat. A product called \u201cbulletproof\u201d is actually bullet-resistant against the ammunition, velocity, shot count, spacing, and test conditions stated in its listing. That distinction matters when comparing bullet proof materials for a bank, pharmacy, courthouse, school office, utility site, or retail counter because one unrated frame or open joint can compromise the barrier.<\/span>\n<h2 id=\"which-bullet-proof-materials-are-used-in-commercial-buildings\"><strong>Which Bullet Proof Materials Are Used in Commercial Buildings?\u00a0<\/strong><\/h2>\n<span style=\"font-weight: 400;\">Commercial buildings use clear and opaque materials based on the threat rating, location, visibility needs, and supporting assembly. The five most common options are listed below.\u00a0<\/span>\n<h3><span style=\"font-weight: 400;\">1. Ballistic Glass and Glass-Clad Polycarbonate<\/span><\/h3>\n<span style=\"font-weight: 400;\">Ballistic glass uses multiple glass plies and bonding interlayers to damage and slow a projectile while keeping fragments on the protected side within the test limit. Glass-clad polycarbonate adds a polycarbonate ply, often on the secure face, to catch fragments and reduce spall. Spall is material thrown from the rear face after impact.<\/span>\n\n<span style=\"font-weight: 400;\">Published architectural products commonly span about 13\/16 to 2-1\/2 inches (21 to 64 mm) for glass-clad polycarbonate, depending on the tested threat. The actual make-up, supported panel size, framing bite, edge clearance, and installation orientation come from the approved shop drawings. Do not size the frame from glass thickness alone.<\/span>\n\n<span style=\"font-weight: 400;\">Among clear bullet proof materials, this family suits:<\/span>\n<ul>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Exterior storefronts and secure vestibules where daylight matters<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Bank and credit-union teller lines<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Government and courthouse service windows<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Pharmacy and hospital intake counters<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Guard booths and controlled entrances<\/span><\/li>\n<\/ul>\n<span style=\"font-weight: 400;\">For exterior work, specify insulated ballistic glazing if the opening also needs thermal performance. Low-e coatings, insulating spaces, sealants, and framing must suit the building enclosure without changing the tested ballistic make-up. A field-added film does not turn ordinary storefront glass into bullet-resistant glazing.<\/span>\n\n<span style=\"font-weight: 400;\">Ballistic glazing is among the most visible bullet proof materials, yet its weakest point is often the perimeter. The frame must hold the glazing after impact, and the surrounding wall must continue the same protective boundary. Clear bullet resistant building materials need rated framing and verified edge engagement.<\/span>\n<h3><span style=\"font-weight: 400;\">2. Acrylic and Laminated Polycarbonate<\/span><\/h3>\n<span style=\"font-weight: 400;\">Acrylic and polycarbonate are clear plastics used in interior barriers where lower panel mass, machining, and visibility matter. Acrylic is stiff and optically clear. Laminated polycarbonate flexes more under impact and usually offers stronger resistance to repeated blunt-force attack.<\/span>\n\n<span style=\"font-weight: 400;\">Representative product ranges show acrylic at roughly 1-1\/4 to 1-3\/8 inches (32 to 35 mm) and laminated polycarbonate at about 3\/4 to 1-1\/4 inches (19 to 32 mm) for common handgun-rated configurations. Those figures are comparison points only. The tested product data controls.<\/span>\n\n<span style=\"font-weight: 400;\">These bullet resistant building materials work well at indoor reception windows, service counters, interior doors, and secure partitions. Compared with glass-heavy bulletproof building materials, they can reduce panel mass and simplify some interior framing. Their practical limits deserve equal attention:<\/span>\n<ul>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Abrasive cleaners can haze or scratch an unprotected face<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Ammonia, ketones, and other incompatible chemicals can cause surface damage or stress cracking<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Some products need a hard coat for public-facing use<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Exterior placement requires written UV and weather exposure approval<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Field holes and notches must stay within the fabricator\u2019s approved details<\/span><\/li>\n<\/ul>\n<span style=\"font-weight: 400;\">Clean clear plastics with the product maker\u2019s approved solution and a soft microfiber cloth. Never assume a cleaner that is safe for standard glass is safe for coated acrylic or polycarbonate. Care instructions matter when selecting bullet proof materials for spaces cleaned several times each day.<\/span>\n<h3><span style=\"font-weight: 400;\">3. Fiberglass Composite Panels<\/span><\/h3>\n<span style=\"font-weight: 400;\">Ballistic fiberglass panels use woven glass fibers saturated with thermoset resin, pressed into rigid sheets. On impact, the layers separate in a controlled way and spread the projectile\u2019s energy through a wider area. This delamination lets the panel catch the projectile without an exposed hard plate that may create ricochet.<\/span>\n\n<span style=\"font-weight: 400;\">Commercial products are commonly sold in 3-by-8-foot, 3-by-10-foot, 4-by-8-foot, and 4-by-10-foot sheets. Published product families run from about 0.245 to 1.54 inches (6 to 39 mm) thick and roughly 2.55 to 16.02 pounds per square foot (12.4 to 78.2 kg\/m\u00b2), depending on rating. Confirm every value from the selected product data.<\/span>\n\n<span style=\"font-weight: 400;\">Fiberglass is one of the most practical bulletproof materials for walls because crews can hide it behind gypsum board, millwork, veneer, or other approved finishes. It is also used inside transaction counters, podiums, desks, doors, and protected rooms. Among opaque bullet resistant building materials, fiberglass fits many occupied-space retrofits without exposed metal.<\/span>\n\n<span style=\"font-weight: 400;\">Installation details decide whether the wall works as intended:<\/span>\n<ul>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Lap or back every vertical and horizontal seam as shown in the tested detail<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Continue coverage below counters and above accessible ceiling lines when the risk assessment requires it<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Use the stated fastener type, diameter, spacing, and edge distance<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Back electrical boxes, data outlets, pass-throughs, and other openings with approved protection<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Seal the transition into rated doors, frames, glazing, floors, and adjoining walls<\/span><\/li>\n<\/ul>\n<span style=\"font-weight: 400;\">Cutting produces abrasive glass-resin dust. Fabrication should follow the safety data sheet, use extraction, and include suitable eye, skin, and respiratory protection. Precut factory panels reduce field dust and make penetration details easier to control. Factor that work into comparisons of bullet proof materials for an occupied retrofit.<\/span>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-38acb0c e-flex e-con-boxed e-con e-parent\" data-id=\"38acb0c\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-887d4ae elementor-widget elementor-widget-image\" data-id=\"887d4ae\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img fetchpriority=\"high\" decoding=\"async\" width=\"928\" height=\"522\" src=\"https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/1-6.webp\" class=\"attachment-large size-large wp-image-12277\" alt=\"\" srcset=\"https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/1-6.webp 928w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/1-6-300x169.webp 300w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/1-6-768x432.webp 768w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/1-6-528x297.webp 528w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/1-6-820x461.webp 820w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/1-6-150x84.webp 150w\" sizes=\"(max-width: 928px) 100vw, 928px\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-2c74984 e-flex e-con-boxed e-con e-parent\" data-id=\"2c74984\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-f2a74e2 elementor-widget elementor-widget-text-editor\" data-id=\"f2a74e2\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<h3><span style=\"font-weight: 400;\">4. Ballistic Steel<\/span><\/h3>\n<span style=\"font-weight: 400;\">Ballistic steel provides high resistance in a thinner profile than many fiber or glazing systems. Fabricators use it in hollow-metal door and frame assemblies, counters, guard enclosures, equipment rooms, wall inserts, and narrow areas where a thick panel would conflict with trim or equipment. It is one of the densest bulletproof building materials, so support and handling affect cost and schedule.<\/span>\n\n<span style=\"font-weight: 400;\">\u201cSteel plate\u201d is not a complete specification. Alloy chemistry, hardness, heat history, plate thickness, shot direction, weld design, edge support, and attachment method affect performance. Substituting ordinary mild steel of the same thickness is unsafe unless the exact assembly has test or engineering support.<\/span>\n\n<span style=\"font-weight: 400;\">Steel asks more of the structure and the installer. A 4-by-8-foot sheet can require lifting equipment even at modest thickness. Field cutting creates hot work, can damage protective coatings, and may change an approved detail. Coastal and exterior sites also need a corrosion system compatible with cut edges, welds, fasteners, and dissimilar metals.<\/span>\n\n<span style=\"font-weight: 400;\">An exposed hard face may deflect projectile fragments. Many designs place steel behind a finish layer or pair it with an anti-ricochet facing specified by the security engineer. These construction details separate engineered ballistic building materials from improvised plate reinforcement. Steel bullet proof materials should arrive with approved fabrication and attachment details. This rule applies to all bulletproof building materials that depend on concealed supports.<\/span>\n<h3><span style=\"font-weight: 400;\">5. Reinforced Concrete and Fully Grouted CMU<\/span><\/h3>\n<span style=\"font-weight: 400;\">Reinforced concrete and fully grouted concrete masonry units, or CMU, can serve as opaque ballistic walls in new construction. Their mass suits secure rooms, police and government facilities, utility sites, data centers, loading areas, and perimeter zones. Among permanent bulletproof building materials, they may also satisfy structural, fire-separation, and acoustic duties when each assembly has the required documentation.<\/span>\n\n<span style=\"font-weight: 400;\">Ordinary concrete and hollow blocks should not be assumed to resist a stated firearm threat. Compressive strength alone does not define ballistic performance. Aggregate, reinforcement, wall thickness, grout, hollow cells, mortar joints, support span, impact angle, repeated shots, and rear-face debris all affect the result.<\/span>\n\n<span style=\"font-weight: 400;\">A nominal 8-inch (203 mm) CMU wall, for instance, can contain hollow cells, partial grout, conduit chases, control joints, and unprotected openings. Its construction may differ sharply from the specimen behind a published test. Concrete and masonry become credible bullet resistant building materials only with a project-specific tested assembly or an engineer\u2019s design based on the stated threat and construction details.<\/span>\n\n<span style=\"font-weight: 400;\">Retrofit work is rarely simple. Added concrete or grout increases dead load, may require foundation review, and can conflict with occupied spaces and existing services. For an interior retrofit, compare bullet proof materials such as fiberglass panels and steel inserts that may cause less disruption, though their seams and transitions still need rated details.<\/span>\n<h2 id=\"how-do-the-five-bullet-proof-materials-compare\"><strong>How Do the Five Bullet Proof Materials Compare?<\/strong><\/h2>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-7dcaa62 e-flex e-con-boxed e-con e-parent\" data-id=\"7dcaa62\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-9f28647 elementor-widget elementor-widget-image\" data-id=\"9f28647\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" width=\"928\" height=\"522\" src=\"https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/3-7.webp\" class=\"attachment-large size-large wp-image-12280\" alt=\"\" srcset=\"https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/3-7.webp 928w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/3-7-300x169.webp 300w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/3-7-768x432.webp 768w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/3-7-528x297.webp 528w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/3-7-820x461.webp 820w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/3-7-150x84.webp 150w\" sizes=\"(max-width: 928px) 100vw, 928px\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-6a73477 e-flex e-con-boxed e-con e-parent\" data-id=\"6a73477\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-869bab8 elementor-widget elementor-widget-text-editor\" data-id=\"869bab8\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-weight: 400;\">These bullet proof materials solve different construction problems. Transparent products protect sightlines and service openings. Opaque products reinforce walls, doors, counters, and protected rooms. The five families cover most bullet resistant building materials specified in commercial interiors and building shells.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">&nbsp;<\/span><\/p>\n<table>\n<tbody>\n<tr>\n<td><strong>Material Family<\/strong><\/td>\n<td><strong>Common Commercial Use<\/strong><\/td>\n<td><strong>Main Advantage<\/strong><\/td>\n<td><strong>Main Constraint<\/strong><\/td>\n<td><strong>What the Submittal Must Show<\/strong><\/td>\n<\/tr>\n<tr>\n<td><span style=\"font-weight: 400;\">Ballistic glass and glass-clad polycarbonate<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Exterior glazing, vestibules, teller windows, secure entrances<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Clear view with ratings available for handgun and rifle threats<\/span><\/td>\n<td><span style=\"font-weight: 400;\">High mass, thick edges, custom frames, longer lead time<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Glazing make-up, exposed edge limits, frame listing, supported size, interior and exterior face<\/span><\/td>\n<\/tr>\n<tr>\n<td><span style=\"font-weight: 400;\">Acrylic and laminated polycarbonate<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Interior transaction windows, reception screens, doors, partitions<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Lower mass than glass-heavy laminates and good optical clarity<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Surface scratching, solvent sensitivity, UV limits for some products<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Coating, approved cleaners, maximum panel size, edge engagement, rating<\/span><\/td>\n<\/tr>\n<tr>\n<td><span style=\"font-weight: 400;\">Fiberglass composite panels<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Walls, counters, desks, doors, safe rooms<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Concealed behind common interior finishes and easier to cut than steel<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Dust control, seam laps, edge support, and fastener details matter<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Panel thickness, areal mass, overlap detail, cutout detail, fastener schedule<\/span><\/td>\n<\/tr>\n<tr>\n<td><span style=\"font-weight: 400;\">Ballistic steel<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Door cores, frames, counters, equipment enclosures, compact wall zones<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Thin profile for a specified rating and strong edge protection<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Heavy sheets, difficult field cutting, corrosion control, ricochet risk if exposed<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Alloy or product designation, plate thickness, weld and fastener detail, finish, test report<\/span><\/td>\n<\/tr>\n<tr>\n<td><span style=\"font-weight: 400;\">Reinforced concrete and fully grouted CMU<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Perimeter walls, secure rooms, utility sites, new construction<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Integrates security with permanent wall construction<\/span><\/td>\n<td><span style=\"font-weight: 400;\">High structural load, difficult retrofit work, uncertain results without tested details<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Mix or masonry specification, reinforcement, grout, joints, penetrations, test or engineering basis<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><span style=\"font-weight: 400;\">Two bulletproof building materials of the same thickness can perform differently because their fiber direction, resin, alloy, laminate stack, backing, and support conditions differ. Compare bullet proof materials by tested threat and assembly detail before comparing thickness.<\/span><\/p>\n<p><b>Read More :&nbsp;<\/b><a href=\"https:\/\/www.dkhardware.com\/blog\/bullet-proof-windows-cost\/\" target=\"_blank\" style=\"background-color: rgb(255, 255, 255);\">Bullet Proof Windows Cost: How Much Are Bulletproof Windows for a Storefront, Counter or Home?<\/a><\/p>\n<h2><strong>What Makes Bullet Proof Materials Bullet Resistant?<\/strong><\/h2>\n<p><span style=\"font-weight: 400;\">A material becomes a credible part of a ballistic barrier only after a representative specimen or assembly passes a recognized test. In North American commercial construction, UL 752, Bullet-Resisting Equipment, is a common specification for glazing, doors, frames, wall panels, counters, and transaction fixtures. The test class identifies the ammunition, velocity, shot count, and shot pattern the specimen resisted. Rated bullet resistant building materials carry documents that tie those conditions to a named product or assembly.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">NIJ Standard 0108.01 covers ballistic-resistant protective materials, while ASTM F3279 addresses ballistic-resistant security glazing. These standards are not interchangeable. Bulletproof building materials tested as flat sheets do not automatically transfer their rating to a frame, fastener, door, wall joint, transaction tray, or field-cut opening.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">The words bullet proof materials describe what people search for. Project documents should use bullet-resistant, name the governing standard and test class, and require submittals for every barrier component. Ballistic building materials should never be approved from a marketing label alone.<\/span><\/p>\n<h2><strong>Why Do Bullet Proof Materials Need Complete Rated Assemblies?<\/strong><\/h2>\n<p><span style=\"font-weight: 400;\">The five bullet proof materials above work only as parts of a continuous barrier. A wall panel that passes its test does not protect an adjacent unrated door, standard aluminum frame, exposed transaction opening, or uncovered return wall.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Before ordering bulletproof building materials, map the barrier in plan, section, and elevation. Then track every transition:<\/span><\/p>\n<ul>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Glazing to frame<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Frame to wall<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Door leaf to frame<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Hinge and lock reinforcement<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Countertop to vertical panel<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Wall to floor and deck above<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Inside and outside corners<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Electrical, mechanical, and communication penetrations<\/span><\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">Heavy ballistic doors also change hardware demands. Compare approved<\/span><a href=\"https:\/\/www.dkhardware.com\/commercial-and-residential-door-hardware-ZC4947M0P1.html\"> <span style=\"font-weight: 400;\">commercial door hardware<\/span><\/a><span style=\"font-weight: 400;\">,<\/span><a href=\"https:\/\/www.dkhardware.com\/commercial-hinges-ZC3501M0P1.html\"> <span style=\"font-weight: 400;\">commercial hinges<\/span><\/a><span style=\"font-weight: 400;\">, and<\/span><a href=\"https:\/\/www.dkhardware.com\/door-closers-and-accessories-ZC44M0P1.html\"> <span style=\"font-weight: 400;\">door closers and accessories<\/span><\/a><span style=\"font-weight: 400;\"> only after the door manufacturer states what is permitted in the listed assembly. Drilling a new hardware prep or swapping a hinge can void the tested configuration.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Egress doors must still release and swing as required.<\/span><a href=\"https:\/\/www.dkhardware.com\/panic-exit-devices-ZC6353M0P1.html\"> <span style=\"font-weight: 400;\">Panic exit devices<\/span><\/a><span style=\"font-weight: 400;\"> used on a ballistic door need the correct fire, egress, accessibility, and assembly approvals. The<\/span><a href=\"https:\/\/www.dkhardware.com\/blog\/the-ultimate-guide-to-commercial-door-hardware\/\"> <span style=\"font-weight: 400;\">commercial door hardware guide<\/span><\/a><span style=\"font-weight: 400;\"> gives useful background on hinges, locks, closers, and exit devices, but the ballistic door submittal remains the controlling document.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-d11c2f8 e-flex e-con-boxed e-con e-parent\" data-id=\"d11c2f8\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-2af9aa1 elementor-widget elementor-widget-image\" data-id=\"2af9aa1\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" width=\"928\" height=\"522\" src=\"https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/2-7.webp\" class=\"attachment-large size-large wp-image-12279\" alt=\"\" srcset=\"https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/2-7.webp 928w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/2-7-300x169.webp 300w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/2-7-768x432.webp 768w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/2-7-528x297.webp 528w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/2-7-820x461.webp 820w, https:\/\/s.dkhardware.com\/blog\/wp-content\/uploads\/2026\/10\/2-7-150x84.webp 150w\" sizes=\"(max-width: 928px) 100vw, 928px\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-5f6ad02 e-flex e-con-boxed e-con e-parent\" data-id=\"5f6ad02\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-22a7738 elementor-widget elementor-widget-text-editor\" data-id=\"22a7738\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<h2 id=\"bullet-resistance-does-not-prove-forced-entry-blast-or-fire-performance\"><strong>Bullet Resistance Does Not Prove Forced-Entry, Blast, or Fire Performance<\/strong><\/h2>\n<span style=\"font-weight: 400;\">UL 752 evaluates ballistic resistance. It does not, by itself, prove resistance to a sustained tool attack, blast pressure, fire exposure, hurricane debris, or tornado debris.<\/span>\n\n<span style=\"font-weight: 400;\">Projects may call for separate tests, such as ASTM F3561 or ASTM F1233 for forced-entry performance, ASTM F1642 for airblast glazing, and fire-door listings tied to NFPA 80 and the adopted building code. Each test answers a different question. Ask for documents covering every hazard named in the owner\u2019s security criteria.<\/span>\n\n<span style=\"font-weight: 400;\">In the United States, the adopted IBC, NFPA 101 where applicable, ADA Standards, and local amendments still govern items such as egress, door operation, clear width, opening force, and accessible hardware. In Canada, the National Building Code as adopted by the province or territory, local amendments, and applicable ULC or cUL listings govern those duties. A UL 752 rating does not replace either code review.<\/span>\n\n<span style=\"font-weight: 400;\">The same separation applies to<\/span><a href=\"https:\/\/www.dkhardware.com\/security-solutions-ZC172M0P1.html\"> <span style=\"font-weight: 400;\">security hardware and entry components<\/span><\/a><span style=\"font-weight: 400;\">. Access control, locks, cameras, glazing, doors, and wall armor perform different jobs within the security plan. No list of bullet proof materials replaces a code and security review.<\/span>\n<h2 id=\"common-specification-and-installation-errors-in-bullet-proof-materials\"><strong>Common Specification and Installation Errors in Bullet Proof Materials\u00a0<\/strong><\/h2>\n<span style=\"font-weight: 400;\">Most failures start at an interface or a late substitution, not in the middle of untouched bullet resistant building materials. The following checks keep the specified protection continuous.<\/span>\n<h3><span style=\"font-weight: 400;\">Naming a Rating Without Naming the Standard<\/span><\/h3>\n<span style=\"font-weight: 400;\">Terms such as handgun-rated or rifle-rated are incomplete. State the standard, test class, ammunition, shot count, and any forced-entry requirement in the project criteria.<\/span>\n<h3><span style=\"font-weight: 400;\">Buying Sheets Before Completing a Threat Assessment<\/span><\/h3>\n<span style=\"font-weight: 400;\">Material selection should follow a documented threat assessment led by a qualified security consultant. Occupancy, likely weapons, sightlines, response time, public access, protected positions, and escape routes influence which bullet proof materials fit the project.<\/span>\n<h3><span style=\"font-weight: 400;\">Leaving Gaps at Seams and Corners<\/span><\/h3>\n<span style=\"font-weight: 400;\">Butt-jointed panels can leave a direct path through the barrier. Use the tested lap, batten, backer strip, or corner construction and inspect it before finish work covers it.<\/span>\n<h3><span style=\"font-weight: 400;\">Cutting Unapproved Penetrations<\/span><\/h3>\n<span style=\"font-weight: 400;\">Electrical boxes, transaction trays, intercoms, passers, ducts, and conduit can break the protective boundary. Detail them before fabrication and use rated accessories or approved backer construction.<\/span>\n<h3><span style=\"font-weight: 400;\">Ignoring Door Mass and Daily Operation<\/span><\/h3>\n<span style=\"font-weight: 400;\">Ballistic glazing and armor increase door mass. The leaf, frame anchors, hinges or pivots, closer, latch, and operator must work together. Verify cycle rating, opening force, closing control, latch engagement, and accessibility after installing these bulletproof building materials.<\/span>\n<h3><span style=\"font-weight: 400;\">Assuming Security Film Stops Bullets<\/span><\/h3>\n<span style=\"font-weight: 400;\">Security film can hold broken glass together and may delay forced entry when installed as part of a tested system. It is not a substitute for bullet-resistant glazing unless the entire glazed assembly carries the required ballistic test documentation.<\/span>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-eaf0fe7 e-con-full blog-faq e-flex e-con e-child\" data-id=\"eaf0fe7\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-2b718537 elementor-widget elementor-widget-heading\" data-id=\"2b718537\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Frequently Asked Questions<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-17960598 elementor-widget elementor-widget-eael-adv-accordion\" data-id=\"17960598\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"eael-adv-accordion.default\">\n\t\t\t\t\t            <div class=\"eael-adv-accordion\" id=\"eael-adv-accordion-17960598\" data-scroll-on-click=\"no\" data-scroll-speed=\"300\" data-accordion-id=\"17960598\" data-accordion-type=\"accordion\" data-toogle-speed=\"300\">\n            <div class=\"eael-accordion-list\">\n\t\t\t\t\t<div id=\"what-are-bulletproof-walls-made-of\" class=\"elementor-tab-title eael-accordion-header\" tabindex=\"0\" data-tab=\"1\" aria-controls=\"elementor-tab-content-3951\"><span class=\"eael-accordion-tab-title\">What Are Bulletproof Walls Made Of?<\/span><span class=\"eael-advanced-accordion-icon-closed\"><svg aria-hidden=\"true\" class=\"fa-accordion-icon e-font-icon-svg e-fas-plus\" viewBox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M416 208H272V64c0-17.67-14.33-32-32-32h-32c-17.67 0-32 14.33-32 32v144H32c-17.67 0-32 14.33-32 32v32c0 17.67 14.33 32 32 32h144v144c0 17.67 14.33 32 32 32h32c17.67 0 32-14.33 32-32V304h144c17.67 0 32-14.33 32-32v-32c0-17.67-14.33-32-32-32z\"><\/path><\/svg><\/span><span class=\"eael-advanced-accordion-icon-opened\"><svg aria-hidden=\"true\" class=\"fa-accordion-icon e-font-icon-svg e-fas-minus\" viewBox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M416 208H32c-17.67 0-32 14.33-32 32v32c0 17.67 14.33 32 32 32h384c17.67 0 32-14.33 32-32v-32c0-17.67-14.33-32-32-32z\"><\/path><\/svg><\/span><\/div><div id=\"elementor-tab-content-3951\" class=\"eael-accordion-content clearfix\" data-tab=\"1\" aria-labelledby=\"what-are-bulletproof-walls-made-of\"><p><span style=\"font-weight: 400\">Bulletproof walls are commonly built with fiberglass composite panels, ballistic steel, reinforced concrete, or fully grouted CMU. For facility teams asking what are bulletproof walls made of, the practical answer is a rated assembly rather than one generic product. People researching what are bulletproof walls made of should look past the surface finish and identify the rated layer behind it. These bullet resistant building materials may also be combined. The tested or engineered assembly must cover seams, corners, openings, supports, fasteners, and transitions into doors and glazing.<\/span><\/p><\/div>\n\t\t\t\t\t<\/div><div class=\"eael-accordion-list\">\n\t\t\t\t\t<div id=\"what-is-the-strongest-material-for-a-bulletproof-wall\" class=\"elementor-tab-title eael-accordion-header\" tabindex=\"0\" data-tab=\"2\" aria-controls=\"elementor-tab-content-3952\"><span class=\"eael-accordion-tab-title\">What Is the Strongest Material for a Bulletproof Wall?<\/span><span class=\"eael-advanced-accordion-icon-closed\"><svg aria-hidden=\"true\" class=\"fa-accordion-icon e-font-icon-svg e-fas-plus\" viewBox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M416 208H272V64c0-17.67-14.33-32-32-32h-32c-17.67 0-32 14.33-32 32v144H32c-17.67 0-32 14.33-32 32v32c0 17.67 14.33 32 32 32h144v144c0 17.67 14.33 32 32 32h32c17.67 0 32-14.33 32-32V304h144c17.67 0 32-14.33 32-32v-32c0-17.67-14.33-32-32-32z\"><\/path><\/svg><\/span><span class=\"eael-advanced-accordion-icon-opened\"><svg aria-hidden=\"true\" class=\"fa-accordion-icon e-font-icon-svg e-fas-minus\" viewBox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M416 208H32c-17.67 0-32 14.33-32 32v32c0 17.67 14.33 32 32 32h384c17.67 0 32-14.33 32-32v-32c0-17.67-14.33-32-32-32z\"><\/path><\/svg><\/span><\/div><div id=\"elementor-tab-content-3952\" class=\"eael-accordion-content clearfix\" data-tab=\"2\" aria-labelledby=\"what-is-the-strongest-material-for-a-bulletproof-wall\"><p><span style=\"font-weight: 400\">There is no strongest material for every project. Rifle threats, handgun threats, available wall depth, structural capacity, fire requirements, corrosion exposure, retrofit access, and finish needs lead to different answers. Choose bullet proof materials by a defined threat and verified assembly rating, not by thickness alone.<\/span><\/p><\/div>\n\t\t\t\t\t<\/div><div class=\"eael-accordion-list\">\n\t\t\t\t\t<div id=\"how-thick-are-bullet-proof-materials\" class=\"elementor-tab-title eael-accordion-header\" tabindex=\"0\" data-tab=\"3\" aria-controls=\"elementor-tab-content-3953\"><span class=\"eael-accordion-tab-title\">How Thick Are Bullet Proof Materials?<\/span><span class=\"eael-advanced-accordion-icon-closed\"><svg aria-hidden=\"true\" class=\"fa-accordion-icon e-font-icon-svg e-fas-plus\" viewBox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M416 208H272V64c0-17.67-14.33-32-32-32h-32c-17.67 0-32 14.33-32 32v144H32c-17.67 0-32 14.33-32 32v32c0 17.67 14.33 32 32 32h144v144c0 17.67 14.33 32 32 32h32c17.67 0 32-14.33 32-32V304h144c17.67 0 32-14.33 32-32v-32c0-17.67-14.33-32-32-32z\"><\/path><\/svg><\/span><span class=\"eael-advanced-accordion-icon-opened\"><svg aria-hidden=\"true\" class=\"fa-accordion-icon e-font-icon-svg e-fas-minus\" viewBox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M416 208H32c-17.67 0-32 14.33-32 32v32c0 17.67 14.33 32 32 32h384c17.67 0 32-14.33 32-32v-32c0-17.67-14.33-32-32-32z\"><\/path><\/svg><\/span><\/div><div id=\"elementor-tab-content-3953\" class=\"eael-accordion-content clearfix\" data-tab=\"3\" aria-labelledby=\"how-thick-are-bullet-proof-materials\"><p><span style=\"font-weight: 400\">Bullet proof materials vary in thickness by material family and test class. Representative bulletproof materials for walls made from fiberglass span roughly 0.245 to 1.54 inches (6 to 39 mm), while architectural transparent products may range from about 3\/4 to 2-1\/2 inches (19 to 64 mm). Use the selected product\u2019s current submittal, not a generic chart, for design and ordering.<\/span><\/p><\/div>\n\t\t\t\t\t<\/div><div class=\"eael-accordion-list\">\n\t\t\t\t\t<div id=\"is-bulletproof-glass-for-commercial-buildings-made-only-of-glass\" class=\"elementor-tab-title eael-accordion-header\" tabindex=\"0\" data-tab=\"4\" aria-controls=\"elementor-tab-content-3954\"><span class=\"eael-accordion-tab-title\">Is Bulletproof Glass for Commercial Buildings Made Only of Glass?<\/span><span class=\"eael-advanced-accordion-icon-closed\"><svg aria-hidden=\"true\" class=\"fa-accordion-icon e-font-icon-svg e-fas-plus\" viewBox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M416 208H272V64c0-17.67-14.33-32-32-32h-32c-17.67 0-32 14.33-32 32v144H32c-17.67 0-32 14.33-32 32v32c0 17.67 14.33 32 32 32h144v144c0 17.67 14.33 32 32 32h32c17.67 0 32-14.33 32-32V304h144c17.67 0 32-14.33 32-32v-32c0-17.67-14.33-32-32-32z\"><\/path><\/svg><\/span><span class=\"eael-advanced-accordion-icon-opened\"><svg aria-hidden=\"true\" class=\"fa-accordion-icon e-font-icon-svg e-fas-minus\" viewBox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M416 208H32c-17.67 0-32 14.33-32 32v32c0 17.67 14.33 32 32 32h384c17.67 0 32-14.33 32-32v-32c0-17.67-14.33-32-32-32z\"><\/path><\/svg><\/span><\/div><div id=\"elementor-tab-content-3954\" class=\"eael-accordion-content clearfix\" data-tab=\"4\" aria-labelledby=\"is-bulletproof-glass-for-commercial-buildings-made-only-of-glass\"><p><span style=\"font-weight: 400\">No. Bulletproof glass for commercial buildings may be laminated glass, acrylic, laminated polycarbonate, glass-clad polycarbonate, or an insulated unit containing a ballistic laminate. Every specification for bulletproof glass for commercial buildings must also cover the frame, seals, edge engagement, anchors, and surrounding construction in the same rated system.<\/span><\/p><\/div>\n\t\t\t\t\t<\/div><div class=\"eael-accordion-list\">\n\t\t\t\t\t<div id=\"can-existing-commercial-walls-be-upgraded\" class=\"elementor-tab-title eael-accordion-header\" tabindex=\"0\" data-tab=\"5\" aria-controls=\"elementor-tab-content-3955\"><span class=\"eael-accordion-tab-title\">Can Existing Commercial Walls Be Upgraded?<\/span><span class=\"eael-advanced-accordion-icon-closed\"><svg aria-hidden=\"true\" class=\"fa-accordion-icon e-font-icon-svg e-fas-plus\" viewBox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M416 208H272V64c0-17.67-14.33-32-32-32h-32c-17.67 0-32 14.33-32 32v144H32c-17.67 0-32 14.33-32 32v32c0 17.67 14.33 32 32 32h144v144c0 17.67 14.33 32 32 32h32c17.67 0 32-14.33 32-32V304h144c17.67 0 32-14.33 32-32v-32c0-17.67-14.33-32-32-32z\"><\/path><\/svg><\/span><span class=\"eael-advanced-accordion-icon-opened\"><svg aria-hidden=\"true\" class=\"fa-accordion-icon e-font-icon-svg e-fas-minus\" viewBox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M416 208H32c-17.67 0-32 14.33-32 32v32c0 17.67 14.33 32 32 32h384c17.67 0 32-14.33 32-32v-32c0-17.67-14.33-32-32-32z\"><\/path><\/svg><\/span><\/div><div id=\"elementor-tab-content-3955\" class=\"eael-accordion-content clearfix\" data-tab=\"5\" aria-labelledby=\"can-existing-commercial-walls-be-upgraded\"><p><span style=\"font-weight: 400\">Many stud walls can be upgraded with tested fiberglass panels or steel inserts, subject to structural review and approved seam, fastener, and penetration details. These bulletproof building materials suit many retrofits. Existing masonry may also be modified, but hollow cells, utilities, joints, and foundation capacity require investigation before design.<\/span><\/p><\/div>\n\t\t\t\t\t<\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-8f39ee3 e-flex e-con-boxed e-con e-parent\" data-id=\"8f39ee3\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-ef866c4 elementor-widget elementor-widget-text-editor\" data-id=\"ef866c4\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<h2 id=\"what-should-the-project-team-confirm-before-ordering\"><strong>What Should The Project Team Confirm Before Ordering?<\/strong><\/h2>\n<span style=\"font-weight: 400;\">Finish the threat assessment and mark the protected boundary on the drawings before requesting quotes for bullet proof materials. Then collect these items for each proposed product:<\/span>\n<ul>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Test standard, class, laboratory report, and listing status<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Ammunition, velocity, shot count, spacing, and protected face<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Maximum tested panel or glazing size<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Thickness and pounds per square foot or kilograms per square meter<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Frame, anchor, fastener, seam, corner, and penetration details<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Interior or exterior exposure approval and cleaning limits<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Fire, egress, accessibility, forced-entry, and blast requirements that apply separately<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Shop drawings showing every transition in plan, section, and elevation<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Installer qualifications and inspection points before finishes close the work<\/span><\/li>\n \t<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Replacement plan for impacted glazing, panels, doors, or frames<\/span><\/li>\n<\/ul>\n<span style=\"font-weight: 400;\">Use the material comparison to narrow the options, then have the security consultant, architect, structural engineer, door and glazing fabricators, code consultant, and authority having jurisdiction review the final assembly. Bullet proof materials protect occupied space only when the rated parts remain continuous. Bullet resistant building materials must also leave the completed building compliant with its fire, egress, accessibility, and structural duties.<\/span>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"No building material stops every firearm threat. A product called \u201cbulletproof\u201d is actually bullet-resistant against the ammunition, velocity,&hellip;","protected":false},"author":8,"featured_media":12275,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"_templately_pack_id":"","_templately_imported_at":"","_templately_source":"","_templately_import_session_id":"","csco_display_header_overlay":false,"csco_singular_sidebar":"","csco_page_header_type":"","csco_page_load_nextpost":"","csco_post_video_location":[],"csco_post_video_location_hash":"","csco_post_video_url":"","csco_post_video_bg_start_time":0,"csco_post_video_bg_end_time":0,"csco_post_video_bg_volume":false,"footnotes":""},"categories":[52],"tags":[],"class_list":["post-12274","post","type-post","status-publish","format-standard","has-post-thumbnail","category-security-hardware","cs-entry","cs-video-wrap"],"acf":[],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/www.dkhardware.com\/blog\/wp-json\/wp\/v2\/posts\/12274","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.dkhardware.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.dkhardware.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.dkhardware.com\/blog\/wp-json\/wp\/v2\/users\/8"}],"replies":[{"embeddable":true,"href":"https:\/\/www.dkhardware.com\/blog\/wp-json\/wp\/v2\/comments?post=12274"}],"version-history":[{"count":0,"href":"https:\/\/www.dkhardware.com\/blog\/wp-json\/wp\/v2\/posts\/12274\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.dkhardware.com\/blog\/wp-json\/wp\/v2\/media\/12275"}],"wp:attachment":[{"href":"https:\/\/www.dkhardware.com\/blog\/wp-json\/wp\/v2\/media?parent=12274"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.dkhardware.com\/blog\/wp-json\/wp\/v2\/categories?post=12274"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.dkhardware.com\/blog\/wp-json\/wp\/v2\/tags?post=12274"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}