RECENTLY VIEWED
Skip to main content
CRL 4" x 10" Center Locks with Deadlatch come with a dead latch that can be dogged in the open position, an 8" (203 mm) Back-to-Back "D" Handle, a Thumbturn on the inside, and a Keyed Cylinder on the outside. The dogging feature is engaged by simply pushing both deadlatch bolts fully into the open position, then engaging the dogging clips by turning either the Keyed Cylinder or Thumbturn until the clips snap in place.
Available in five attractive finishes for 1/2" (12 mm) heavy glass doors. Custom Locks with different accessories are available on special order.
Product Warning:
Products manufactured by C.R. Laurence Co., Inc. (CRL) with an Oil Rubbed Bronze Finish are inspected at our facilities prior to packaging and shipping. Within two days of receipt of these products you are advised to open the package, remove all of the protective wrap from the product, then inspect the product thoroughly. You must report any damage or irregularity of the finish to CRL immediately. Please be advised that CRL will not be held liable for damages reported at a later date.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
CRL DL410RBS Brushed Stainless 4" x 10" RH/LHR Center Lock with Deadlatch
Item #: DL410RBS by CR Laurence
See reviewsSee reviews
QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
- For Use with 1/2" (12 mm) Glass
- Use Monolithic Tempered Glass
- Installs Easily with Bolts; No Silicone or Cement Required
- Custom Sizes for Other Glass Thicknesses and Custom Finishes Can Be Special Ordered
Shipping Weight
2 lb (907g)
Finish
Brushed Stainless
Width
4
Handing
Left Hand
Glazing Thickness
1/2
Finish/Color
Brushed Stainless Steel
Height
10
Product Overview
CRL 4" x 10" Center Locks with Deadlatch come with a dead latch that can be dogged in the open position, an 8" (203 mm) Back-to-Back "D" Handle, a Thumbturn on the inside, and a Keyed Cylinder on the outside. The dogging feature is engaged by simply pushing both deadlatch bolts fully into the open position, then engaging the dogging clips by turning either the Keyed Cylinder or Thumbturn until the clips snap in place.
Available in five attractive finishes for 1/2" (12 mm) heavy glass doors. Custom Locks with different accessories are available on special order.
Product Warning:
Products manufactured by C.R. Laurence Co., Inc. (CRL) with an Oil Rubbed Bronze Finish are inspected at our facilities prior to packaging and shipping. Within two days of receipt of these products you are advised to open the package, remove all of the protective wrap from the product, then inspect the product thoroughly. You must report any damage or irregularity of the finish to CRL immediately. Please be advised that CRL will not be held liable for damages reported at a later date.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.