Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
CRL RS0B25BS 316 Brushed Stainless Steel Dome 2-3/8" Glass Rail Standoff Fitting with Mounting Plate
Item #: RS0B25BS by CR Laurence
See reviews See
reviews
In Stock $356.15 /each
SAVE UP TO 35.61
Buying in bulk
QUICK SHIPPING*Usually ships in 1 business day
QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See How
Watch Now
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
- For Use with 1/2" and 3/4" (12 and 19 mm) Monolithic Tempered Glass or 9/16" and 27/32" (13.52 and 21.52 mm) Laminated Tempered Glass Using Kuraray SentryGlas® Interlayer
- For Use with 1/2" and 3/4" (12 and 19 mm) Monolithic Tempered Glass or 9/16" and 27/32" (13.52 and 21.52 mm) Laminated Tempered Glass Using DuPont® SentryGlas® Interlayers
- Custom Sizes and Finishes Available
- Designed to Mount to Wood, Concrete or Steel
- For Use With 1/2" and 3/4" (12 and 19 mm) Monolithic Tempered Glass or 9/16" and 27/32" (13.52 and 21.52 mm) Laminated Tempered Glass Using DuPont™ SentryGlas® Interlayers
- High Grade Alloy 316 Stainless Steel Standard
Glass Fabrication
Two 3/4 in (19 mm) Diameter Holes Per Fitting
Mounting Plate Height
8 in. (203.2 mm)
Mounting Plate Width
4 in. (101.6 mm)
Finish
Brushed Stainless Steel
Type
Dome
Width
2
Base Plate Thickness (Inches)
3/8
Base Plate Length (Inches)
4
Material
316 Stainless Steel
Base Plate Height (Inches)
9-1/4
Finish/Color
Brushed Stainless Steel
Base Plate Height
9-1/4 in. (235 mm)
Base Plate Length
4 in. (102 mm)
Base Plate Thickness
3/8 in. (10 mm)
This CRL Point Supported Standoff Fitting has a 4" x 9-1/4" (102 x 235 mm) back plate giving the installer more adjustment, and four anchor points during installation for those tricky job site mounting conditions. The steel back plate can be fastened directly to steel, concrete, or wood substrates and includes a cover plate. This versatile Standoff Fitting features a 2-3/8" (60 mm) diameter domed cap with a 3/8"-16 threaded stainless steel rod to secure the glass panel.
The 2-3/8" (60 mm) diameter Standoffs are mechanically fastened to a 3/8" (10 mm) thick Alloy 316 grade stainless steel back plate that is pre-drilled for mounting. Two popular stainless steel finishes are available from stock. If your customer has a special job site condition, custom diameters and lengths are also available. Attachment anchors for wood, concrete or steel are sold separately.
SPECIFICATIONS:
For use with 1/2" or 3/4" (12 or 19 mm) Monolithic Tempered Glass. Also for use with 9/16" or 27/32" (13.52 or 21.52 mm) Laminated Tempered Glass using Kuraray SentryGlas® Interlayer. Do not use with raw or annealed glass.
GLASS FABRICATION: Two 3/4" (19 mm) Diameter Holes Per Fitting.
Spacing: Maximum spacing between fittings depends on use and mounting conditions; Minimum hole spacing between standoffs is 4" (102 mm). See our engineering report at https://www.dkhardware.com/datasheets/testreports/docs/Standoff_Railing_Sys_Rep_032713.pdf
Product Warning:
For use with 1/2" or 3/4" (12 or 19 mm) tempered glass. Do not use with raw or annealed glass. NOTE: Maximum bracket spacing is 24" (610 mm) on center with 48" (1.22 m) maximum glass panel widths.
.
Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.