CRL Angle Panel Connectors are designed to connect free standing dressing screens, fireplace screens or decorative panels. CRL's Angle Panel Connectors will work with panel thicknesses from 3/16" to 3/4" (4.7 to 19 mm) and are fully adjustable in angles up to 300º. Available in several popular finishes and either standard or low profile cap designs. The Angle Panel Connectors require a drilled hole for installation. Supplied with two each 1/4"-20 x 3/4" and two each 1/4"-20 x 1-1/4" Allen Screws to accommodate varying panel thicknesses. Panel thicknesses less than 3/8" (10 mm) will require cutting the Allen Screw. The Standard Caps can easily be tightened using Cat. No. S0W Standoff Wrench. The Low Profile Caps are tightened by placing a low profile neoprene or rubber pad in the palm of your hand, applying pressure, and then turning.
Supplied with two each 1/4"-20 x 3/4" and two each 1/4"-20 x 1-1/4" Allen Screws to accommodate varying panel thicknesses. NOTE: Panel thicknesses less than 3/8" (10 mm) will require cutting the Allen Screw. The Standard Caps can easily be tightened using Cat. No. S0W Standoff Wrench. The Low Profile Caps are tightened by placing a flat neoprene or rubber pad in the palm of your hand, applying pressure, and then turning.