Skip to main content
Powder Coated Custom Painted Single Narrow Floating Header with Surface Mounted Top Pivots - Custom Length

Roll over image to zoom in

CRL NFH4PTCS Powder Coated Custom Painted Single Narrow Floating Header with Surface Mounted Top Pivots - Custom Length

Item #: NFH4PTCS by CR Laurence

See reviewsSee reviews

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

Features
  • Creates an Even Sight Line When Used With CRL Door Rails
  • Custom Sizes and Configurations
  • Several Standard Finishes Available: Satin Anodized, Dark Bronze Anodized, Black Anodized, Polished Stainless, Brushed Stainless, Satin Brass and Polished Brass
  • Supported by Glass Side Panels

Custom

Custom

Finish

Powder Coated

Glass Size

1/2"

Door Configuration

Single Door

Length

Custom

Glazing Thickness

3/8, 1/2

Finish/Color

Powder Coated

Product Overview

The 1-7/8" x 1-5/8" (47.6 x 89 mm) CRL Custom Narrow Floating Header with Surface Mounted Top Pivots work with PH20 Series and PH21 Series Top Door Patch Hardware Fittings, and with all 3/8" or 1/2" (10 or 12 mm) Heavy Glass Door Rails. When used with CRL Door Rails, you get an even sight line, as the width of the Narrow Header matches the width of the Door Rail. For use with Free Swinging Bottom Pivots or Floor Closers. These Headers are custom fabricated per your specific glass-to-glass configurations.
NOTE: Length and installation type must be specified when ordering. For additional assistance regarding other possible configurations, contact DK Hardware Sales Department.
Product Warning:
STRUCTURAL DISCLAIMER - All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures.
If the weight of the transom above the header exceeds 100 pounds (45.4 kg) the transom will need to be supported from the ceiling to take weight off of the header and prevent bowing. The customer can use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact Technical Sales Department for assistance.

.