RECENTLY VIEWED
Skip to main content
Dremel Ultra-Saw cut off wheel uses diamond as the abrasive material and has a diameter of 3-1/2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Dremel cut off wheel can be run at a maximum speed of 20000 RPMs.
Specifications:
Specification parameters description:
Abrasive Material:
Values: A/O Aluminum Oxide AO A/Z Alumina Zirconia AZ S/C Silicon Carbide SC Alumina Zirconia Alumina zirconia is very dense and can be used under high temperatures for heavy-duty stock removal, wood planing, and grinding of fiberglass and plastics. The abrasive grain is designed to fracture during use so that it maintains sharpness. Aluminum Oxide Aluminum oxide is an artificial abrasive suited for general purpose stock removal and finishing. It is the mostly commonly used abrasive and can be used for most steels and ferrous alloys. Aluminum oxide is slightly softer but tougher than silicon carbide. Aluminum Silicate Aluminum silicate is a synthetic abrasive used mainly for cleaning steel, nonferrous materials, and stonework. CBN Cubic boron nitride (CBN) is a synthetic material used in superabrasive products. It is similar in hardness to diamond and is very cool cutting. CBN is used for grinding high speed steel (HSS), hardened cast iron, and stainless steel. Ceramic Ceramic is used for aggressive cutting and grinding of stainless steel, titanium, and metal alloys. The abrasive grain is designed to fracture during use so that it maintains sharpness. Diamond Diamond can be either natural or manufactured and is one of the hardest abrasive materials. It is commonly used for grinding and polishing stone and very hard steels, and for sharpening other cutting tools. High-Speed Steel BiMetal Cubic Boron Nitride Carbide Emery Fiberglass Silicon Carbide Zirconia Zirconium Ceramic Aluminum Oxide
Maximum RPM:
The maximum rotations per minute (RPM) a product is designed to be used at should be respected for the sake of safety and use life. Maximum RPM is provided for all product listings where applicable and is often printed on the item in the case of discs and wheels. Operating a wheel above its maximum recommended speed can cause a wheel to crack or even shatter.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
Dremel US540 Ultra-Saw 4 in. Diamond Tile Cutting Wheel for Floor Tile, Wall Tile, Porcelain, Ceramic, Slate, Stone and Cement Board
Item #: US540 by Bosch
UPC #: 080596037659
See reviewsSee reviews
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
Power Tool Product Type
Rotary Tool Accessory
Product Length (in.)
4.11
Rotary & Multi-Tools Accessories Type
Cutoff Wheel
Tools Product Type
Power Tool
Pack Size
1
Diameter (in.)
3.5
Rotary Tool Accessory Type
Cutting Wheel
Maximum RPM
20000
Wheel Diameter
3-1/2"
Abrasive Material
Diamond
Center Hole Size (in)
7/16"
Trade Name
Ultra-Saw
Wheel Color
White
UNSPSC
27112800
Product Overview
The Dremel US540 Diamond Tile Wheel features a sturdy diamond-grit cutting edge for precision and lasting performance. This wheel is perfect for a variety of tile including floor tile and porcelain. The diamond-grit edge on the UM540 Tile wheel cuts most tiles and masonry materials with ease and precision.
- Diamond coated to cut through tough materials and leave a clean finish
- Cut tile with no water needed
- Ideal for most masonry and tile materials such as floor tile, wall tile, porcelain, ceramic, slate, stone and cement board
- Fast and quick way to remove grout
Dremel Ultra-Saw cut off wheel uses diamond as the abrasive material and has a diameter of 3-1/2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Dremel cut off wheel can be run at a maximum speed of 20000 RPMs.
Specifications:
Series: US540-01
Additional Information: One Piece (Mandrel & Blade)
Specification parameters description:
Abrasive Material:
Values: A/O Aluminum Oxide AO A/Z Alumina Zirconia AZ S/C Silicon Carbide SC Alumina Zirconia Alumina zirconia is very dense and can be used under high temperatures for heavy-duty stock removal, wood planing, and grinding of fiberglass and plastics. The abrasive grain is designed to fracture during use so that it maintains sharpness. Aluminum Oxide Aluminum oxide is an artificial abrasive suited for general purpose stock removal and finishing. It is the mostly commonly used abrasive and can be used for most steels and ferrous alloys. Aluminum oxide is slightly softer but tougher than silicon carbide. Aluminum Silicate Aluminum silicate is a synthetic abrasive used mainly for cleaning steel, nonferrous materials, and stonework. CBN Cubic boron nitride (CBN) is a synthetic material used in superabrasive products. It is similar in hardness to diamond and is very cool cutting. CBN is used for grinding high speed steel (HSS), hardened cast iron, and stainless steel. Ceramic Ceramic is used for aggressive cutting and grinding of stainless steel, titanium, and metal alloys. The abrasive grain is designed to fracture during use so that it maintains sharpness. Diamond Diamond can be either natural or manufactured and is one of the hardest abrasive materials. It is commonly used for grinding and polishing stone and very hard steels, and for sharpening other cutting tools. High-Speed Steel BiMetal Cubic Boron Nitride Carbide Emery Fiberglass Silicon Carbide Zirconia Zirconium Ceramic Aluminum Oxide
Maximum RPM:
The maximum rotations per minute (RPM) a product is designed to be used at should be respected for the sake of safety and use life. Maximum RPM is provided for all product listings where applicable and is often printed on the item in the case of discs and wheels. Operating a wheel above its maximum recommended speed can cause a wheel to crack or even shatter.