Roll over image to zoom in
CRL D1638DU Duranodic Bronze Top Channel 144" Stock Length
Item #: D1638DU by CR LaurenceItem Discontinued!
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
- Mirror Mount System Made from Three Easy-to-Use Extrusions
.050 (1.27 mm)
This unique CRL Top Channel is designed to fit into the pocket created by the D1637M cleat, which is attached to the wall at the top portion of the mirror. When used with a bottom FHA J-Bar, the CRL Mirror Mount System affords the installer a neat, trim way to mount mirrors with a narrow 5/16" (7.9 mm) frame. The unique offset profile of the cleat in conjunction with the top cap and the J-Bar helps keep moisture from being trapped behind the mirror, while also concealing screws and support hardware.
Hint: Closed ends can be created by trimming back a portion of the channel, and bending back the front flaps to close off the ends.
NOTE: Not recommended for schools, hospitals, or institutions where mirror edges should be protected on all four sides.
Material: 6063-T5 Aluminum Alloy
Thickness: .050 (1.27 mm)
Stock Length: 12' (3.66 m)
Typical Use: At the top of a mirror. Fits in the pocket created by the D1637M Cleat.
Stock lengths must ship common carrier unless specifically cut for UPS shipment.
Not recommended for schools, hospitals or institutions where mirror edges should be protected on all four sides.