RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov
Features
- Brushable and paintable consistency makes applications easy
- High adhesion works on both bare metal and painted surfaces
- Fast skinning starts in about 10 to 15 min
- Non-sagging formula keeps seam sealer in place, non-staining, permanently elastic
Color/Finish
Gray
Container Type
Cartridge
Standard/Approvals
California Pro65 Warning: Cancer and Reproductive Harm
Setting Time
10 to 20 min
Paintable (Y/N)
Yes
Odor/Scent
Ketone
Flash Point
25 deg F
Curing Time
24 hr
Container Size (oz)
12
Application Time
10 min
Applicable Materials
Metal
MFR Model
550
Specific Gravity
0.86
Part no.
550
Form
Paste
Application
For fresh welds, floor seams, trunk seams, drip rails, voids and gaps creates a water-tight repair that stay in place without cracking
Color
Gray
Package Size
0.75 lb
CureTime
2 hr
Trade Name
Dynatron
Product Form
Paste
Hazardous Shipping
UN1866 (VESSEL, IATA & IMO)
Indoor or Outdoor
Indoor / Outdoor
Alternative UPC
70008003967
Alternate Part Number-1
70008003967
Part Status
A
Product Overview
Dynatron™ auto seam sealer caulk is a fast skinning, permanently elastic, non-sagging formulation that is brushable and paintable. Our sealer provides excellent adhesion to bare metal or painted surfaces and is a non-staining, all-purpose autobody joint and seam sealer. Dynatron™ auto seam sealer caulk lay down well on both bare metal and painted surfaces. Our sealer offers high adhesion and has a thick consistency that makes it less likely to drip, sag or run out of the gap being sealed. It dries quickly with little shrinkage. Our sealer creates a water tight repair that stay in place without cracking. Recommended applications include fresh welds, floor seams, trunk seams, drip rails, voids and gaps. Our seam sealer formula can be brushed or painted on with exceptionally high quality results. When desired, it can be feathered out to a thin layer. The sealer starts to skin in about 10 to 15 min and should be fully hard by the next day.
Composition:
10 to 30% Limestone, 10 to 30% Toluene, 7 to 13% Alpha-Methylstyrene-Vinyl toluene Copolymer, 7 to 13% Hydrogenated Synthetic Rubber Polymer, 5 to 10% Methyl Ethyl Ketone, 5 to 10% Hydrogenated Hydrocarbon Polymer, '3 to 7% White Mineral Oil (Petroleum), 1 to 5% Synthetic Amorphous Silica, Fumed, Crystalline Free, 1 to 5% Titanium Dioxide, 2-Benzotriazolyl-4-Methylphenol, <0.5% Ethylbenzene, Quartz Silica
Composition:
10 to 30% Limestone, 10 to 30% Toluene, 7 to 13% Alpha-Methylstyrene-Vinyl toluene Copolymer, 7 to 13% Hydrogenated Synthetic Rubber Polymer, 5 to 10% Methyl Ethyl Ketone, 5 to 10% Hydrogenated Hydrocarbon Polymer, '3 to 7% White Mineral Oil (Petroleum), 1 to 5% Synthetic Amorphous Silica, Fumed, Crystalline Free, 1 to 5% Titanium Dioxide, 2-Benzotriazolyl-4-Methylphenol, <0.5% Ethylbenzene, Quartz Silica