Falcon Q330-391-626-C Conventional Cylinders, Satin Chrome

K SeriesGrade 1 cylindrical lever locks

High traffic, high abuse door openings demand a Grade 1 quality lock to keep doors secure. When quality and reliability are needed but cost is a concern, the certified ANSI/BHMA Grade 1 Falcon K Series can do the job. The Falcon K Series gets back to basics by offering the most common functions, lever styles and finishes at an affordable price. The K Series features conventional cylinders and small format interchangeable cores that are compatible with SFIC products from other manufacturers. Conventional cylinders are available in all Falcon conventional key sections, as well as Schlage C keyway, which is now master keyed across the complete Falcon product line.

Features:

• PressureReleaseTM outside lever disengages when locked to protect internal mechanisms

• Four screws through-bolted for added strength, providing high security and peace of mind

• All lever designs meet ADA requirements

• UL listed latch standard

• Non-handed levers for easy field installation

• Conventional cylinders or interchangeable core keying compatible with SFIC products from Falcon or other manufacturers

Product specifications: ANSI/BHMA:

• Certified ANSI/BHMA A156.2, Series 4000, Grade 1.

UL:

• Listed for 3-hour fire door, A label.

Functions:

• 8 commercial functions available.

Finishes:

• Available in BHMA 613 and 626.

Door thickness:

• Adjustable 1 3/8" to 2 1/4".
• Comes set for a 1 3/4" thick door standard.

Backset:

• 2 3/4" standard.

Mechanism:

• Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance.
• Springs are stainless steel.

Handing:

• Locks are non-handed.

Cylinders:

• Conventional cylinder, drilled with 6-pin chambers, pinned in 5 comes standard. Pinning in 6 chambers available (at no cost) when specified. Optional 7-pin conventional and 6- or 7-pin Small Format Interchangeable Core (SFIC) cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.

Keyways:

• "G" keyway standard on conventional cylinders. "A" keyway standard on SFIC cylinders.

Trim:

• Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers–no inserts) material finished to match mating parts.

Latches:

• 2 1/4" x 1 1/8" square corner with 2 3/4" backset comes standard; 2 3/8" backset option available if specified. Radius corners for both 2 3/8" and 2 3/4" backsets available if specified. All latches are UL listed and conform to both beveled and non-beveled doors.

Strikes:

• 4 7/8" x 1 1/4" ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard.

Screws:

• Furnished with combination screws for use in wood or metal doors and frames.

Architectural specifications

Key-in-lever cylindrical locksets shall be Falcon lock K Series or equal and meet the following requirements:

• All locks shall meet the ANSI/BHMA A156.2, Series 4000, Grade 1 for key-in-lever locksets.

• Locksets shall be UL Listed (3 hour A Label).

• Locksets shall be provided standard with a clutching lever design. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.

• Lever trim shall have individual torsion springs behind rose for lever return and to prevent lever sag. Trim shall be through bolted with four (4) screws to provide strength and resistance to loosening. Inner and outer trim shall "bottom out" to prevent door collapse. Roses shall be minimum of 3 1/2" diameter.

• All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by allen-head set and lever catch to prevent tampering or vandalism.

• Locksets shall adjust to fit door thickness from 1 3/8" to 2 1/4".

• All locksets shall be non-handed and not require field disassembly for re-handing.

• Preparation for door must be non-handed.

• Cylinders to be secured by a dual retainer.

• Acceptable manufacturer: Falcon Lock