Falcon T511CP6D-DAN-626Click To Copy Entry Dane Lever, 6-Pin, Schlage C Keyway, Cylindrical Lock, Deadlatch, ANSI Strike, 2-3/4" Backset, Grade 1, UL, 626/US26D Satin Chrome

T SeriesGrade 1, extra heavy-duty cylindrical lever locks

Simply put, the Falcon T Series lock is the most versatile lockset in the industry. This extra heavy-duty lock can accept most manufacturer’s cylinders. Designed with compression springs in the spring cages, T Series virtually eliminates lever sag for long lasting performance. This adaptable lock is well suited for either new construction or retrofit use in buildings as varied as multi-family, retail, institutional and government/military.

Features:

• All lever designs meet ADA requirements

• Brass or cold-formed steel construction, zinc plated and dichromated for rust resistance

• Proven compression spring design supports levers, eliminating lever sag and provides years of reliable service

• Heavy wrought brass or bronze roses over steel through-bolted rose inserts

• PressureRelease™ outside lever disengages when locked to protect internal mechanisms

Product specifications: ANSI/BHMA:

• Certified ANSI/BHMA A156.2, Series 4000, Grade 1.

UL:

• Listed for 3-hour fire door, A label.

Functions:

• 13 mechanical and 2 electrified (24 VDC .185 Amp) commercial functions available.

Finishes:

• Available in BHMA 605, 606, 613, 619, 622, 625, 626,
  and 643e.

Door thickness:

• 1 3/4" to 2 1/4" standard. Thin door adapter kit (A30775-000-00) available for doors 1 3/8" to 1 3/4", please specify door thickness.

Backset:

• 2 3/4" standard.

Mechanism:

• Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. compression spring design supports levers, eliminating lever sag and providing years of reliable service.

Attachment:

• Lock chassis secured to door by threaded mounting nuts. Preassembled outer trim and inner spindle assembly are through-bolted over chassis using two (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation.

Handing:

• Locks are non-handed.

Cylinders:

• Conventional cylinder, drilled with 6-pin chambers, pinned in 5 comes standard. Pinning in 6 chambers available (at no cost) when specified. Springs are phosphor bronze. Two nickel silver keys furnished standard.

Keyways:

• "G" keyway standard on conventional cylinders. "A" keyway standard on SFIC cylinders.

Trim:

• Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted. Levers are pressure cast (solid levers–no inserts) material finished to match mating parts.

Latches:

• 1/2" bolt projection, UL listed with square corner latch faceplate 2 1/4" x 1 1/8" standard.

Strikes:

• 4 7/8" x 1 1/4" ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard.

Screws:

• Furnished with combination screws for use in wood or metal doors and frames.

Architectural specifications

Key-in-lever cylindrical locksets shall be Falcon lock T Series or equal and meet the following requirements:

• Key-in-lever cylindrical locksets shall be Falcon lock T Series or equal and meet the following requirements:

• Locksets shall be UL Listed (3 hour A Label).

• Locksets shall be provided standard with a clutching lever design. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.

• Lever trim shall have individual heavy-duty compression springs behind rose for lever return and to prevent lever sag. Trim shall be through-bolted with two (2) 10-32 screws coated with thread sealant to provide strength and resistance to loosening. Inner and outer trim shall "bottom out" to prevent door collapse. Roses shall be minimum of 3 1/2" diameter.

• All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by Allen-head set screw to prevent tampering or vandalism.

• Locksets shall adjust to fit door thickness from 1 3/4" to 2 1/8".

• All locksets shall be non-handed and not require field disassembly for re-handing.

• Preparation for door must be non-handed.

• Acceptable manufacturer: Falcon lock