RECENTLY VIEWED
Skip to main content
Glass Fabrication:
Use FHC Template SD28 For Glass Fab Template
Overview:
FHC 180 Degree Glass to Glass Beveled Profile Clamps are designed for connecting inline fixed glass panels together. Glass fabrication is required, reference FHC's glass fabrication template for hole drilling and clearance requirements. These 180 Degree Glass to Glass Clamps have a wide range of uses outside typical shower applications. Use FHC Tru-Clear silicone to provide a water-tight seal after clamp installation.
Gasket Specifications:
For 3/8" (10 mm) Glass: Use One Thick Gasket On Each Side For 1/2" (12 mm) Glass: Use One Thin Gasket On Each Side
Glass Instructions:
Only use tempered safety glass. To prevent damage to the hinge finish during installation, do not use power tools when installing these hinges.
Material/Construction:
High Quality Plated Solid Brass
Warnings:
Not for use with laminated glass
Care & Cleaning Guidelines:
For best results, keep the following recommendations in mind when caring for your FHC shower door hardware. Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle, cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
FHC CBU1800RB Beveled 180 Degree Glass to Glass Clamp - Oil Rubbed Bronze
Item #: CBU1800RB by Frameless Hardware Company LLC
See reviewsSee reviews
QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
- Fixed 180 Degree Glass to Glass Beveled Clamp
- Designed For 3/8"-1/2" (10 mm to 12 mm) Tempered Glass
- Designed to Secure Fixed 180 Degree Inline Glass Panels Together
- Requires One 3/4" Diameter Hole Drilled in Each Glass Panel
- Commonly used in Residential Bath and Commercial Hotel Applications
Gasket Specifications
For 3/8" (10 mm) Glass: Use One Thick Gasket On Each Side For 1/2" (12 mm) Glass: Use One Thin Gasket On Each Side
Compare To
BGC1800RB
CP1800B
Door Material
6654
Color/Finish
oil rubbed bronze
Product Width
5"
Product Height
2"
Product Overview
Glass Fabrication:
Use FHC Template SD28 For Glass Fab Template
Overview:
FHC 180 Degree Glass to Glass Beveled Profile Clamps are designed for connecting inline fixed glass panels together. Glass fabrication is required, reference FHC's glass fabrication template for hole drilling and clearance requirements. These 180 Degree Glass to Glass Clamps have a wide range of uses outside typical shower applications. Use FHC Tru-Clear silicone to provide a water-tight seal after clamp installation.
Gasket Specifications:
For 3/8" (10 mm) Glass: Use One Thick Gasket On Each Side For 1/2" (12 mm) Glass: Use One Thin Gasket On Each Side
Glass Instructions:
Only use tempered safety glass. To prevent damage to the hinge finish during installation, do not use power tools when installing these hinges.
Material/Construction:
High Quality Plated Solid Brass
Warnings:
Not for use with laminated glass
Care & Cleaning Guidelines:
For best results, keep the following recommendations in mind when caring for your FHC shower door hardware. Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle, cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.