RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
Franklin Industrial WEBSO1246015 LAMINATING 25 - COLD PRESS HPL
Item #: WEBSO1246015 by Franklin Industrial
See reviewsSee reviews
Use Code: SAVEBIG2025 for Extra 10% Off
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
Production Time
Special online order - 14 days
Viscosity
5000 cps
Weight
517 lb
Base
Polyvinyl Acetate Emulsion
Product Overview
Laminating 25 is a moderately fast-setting adhesive for cold pressing high-pressure laminate to a variety of core materials. It is formulated to combine a long assembly time with a moderately fast press time. Laminating 25 fits the needs of most of the industry, combining a 15-minute lay up time with an approximately 45-minute press time.
Advantages And Benefits
KEY PRODUCT FEATURES
- Long assembly time
- Short press time
- One-component
- Formaldehyde-free
- 175.105 FDA Compliant
Application
Preparation of stock that will be glued is extremely important. Joints cut from rip saws should be free of saw marks. They should also be straight and square. Molded or jointed stock should be free of knife marks. Glazed or burnished joints will prevent adhesive penetration and should be avoided.
Gluing stock should be uniform in thickness. Variation in thickness should not exceed 0.005 in/0.12 mm.
Sanding to thickness should be performed using higher than 50 grit abrasives. When possible, glue joints should
be prepared and glued the same day.
Spreads of 35-50 pounds of adhesive per 1,000 square feet or 170-250 grams per square meter of glue line are adequate. Verify adequate glue coverage by monitoring for squeeze out along the glue line once the panels are under pressure.
Advantages And Benefits
KEY PRODUCT FEATURES
- Long assembly time
- Short press time
- One-component
- Formaldehyde-free
- 175.105 FDA Compliant
Application
Preparation of stock that will be glued is extremely important. Joints cut from rip saws should be free of saw marks. They should also be straight and square. Molded or jointed stock should be free of knife marks. Glazed or burnished joints will prevent adhesive penetration and should be avoided.
Gluing stock should be uniform in thickness. Variation in thickness should not exceed 0.005 in/0.12 mm.
Sanding to thickness should be performed using higher than 50 grit abrasives. When possible, glue joints should
be prepared and glued the same day.
Spreads of 35-50 pounds of adhesive per 1,000 square feet or 170-250 grams per square meter of glue line are adequate. Verify adequate glue coverage by monitoring for squeeze out along the glue line once the panels are under pressure.