RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
Franklin Industrial WEBSO1246017 MULTIBOND 1060 - HOT/COLD PRESS VENEERED
Item #: WEBSO1246017 by Franklin Industrial
See reviewsSee reviews
Use Code: SAVEBIG2025 for Extra 10% Off
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
Base
Cross-linking Polyvinyl Acetate
Weight
496 lb
Viscosity
4500 cPs
Features
Water Resistant
Production Time
Special online order - 14 days
Product Overview
Multibond 1060 is a one-part crosslinking polyvinyl acetate emulsion adhesive developed for a wide range of laminating applications. It can be used as an edge and face gluing adhesive. It is water-resistant and offers protection from bleed-through on thin veneers.
Advantages And Benefits
KEY PRODUCT FEATURES
- A good choice for hot press laminating
- Bleed-through resistant
- Water resistant
- No added formaldehyde
Application
Preparation of stock that will be glued is extremely important. Joints cut from rip saws should be free of saw marks. They should also be straight and square. Molded or jointed stock should be free of knife marks. Glazed or burnished joints will prevent adhesive penetration and should be avoided.
Gluing stock should be uniform in thickness. Variation in thickness should not exceed 0.005 in/0.12 mm.
Sanding to thickness should be performed using higher than 50 grit abrasives. When possible, glue joints should
be prepared and glued the same day.
Spreads of 35-50 pounds of adhesive per 1,000 square feet or 170-250 grams per square meter of glue line are adequate. Verify adequate glue coverage by monitoring for squeeze out along the glue line once the panels are under pressure.
Advantages And Benefits
KEY PRODUCT FEATURES
- A good choice for hot press laminating
- Bleed-through resistant
- Water resistant
- No added formaldehyde
Application
Preparation of stock that will be glued is extremely important. Joints cut from rip saws should be free of saw marks. They should also be straight and square. Molded or jointed stock should be free of knife marks. Glazed or burnished joints will prevent adhesive penetration and should be avoided.
Gluing stock should be uniform in thickness. Variation in thickness should not exceed 0.005 in/0.12 mm.
Sanding to thickness should be performed using higher than 50 grit abrasives. When possible, glue joints should
be prepared and glued the same day.
Spreads of 35-50 pounds of adhesive per 1,000 square feet or 170-250 grams per square meter of glue line are adequate. Verify adequate glue coverage by monitoring for squeeze out along the glue line once the panels are under pressure.