Gedore 3301668Click To Copy R21560002 Tool set in workshop trolley MECHANIC red 166 pieces

Solid sheet steel construction, torsion-resistant, highly loadable, Working platform with ABS top, Sides with Euro-standard square perforation for accessories, 6 drawers with telescopic fully extending runners, with individual locking (one-hand operation), The individual locking device - unlockable only with a practical, concealed release bar - prevents the drawer being opened when the trolley is in motion, Load capacity 25 kg per drawer, variable partitionable, Drawer size inside: W 482 x D 345 mm, front height 4x 69 mm, 1x 144 mm, 1x 218 mm, Central locking with cylinder lock with 4 keys, 2 swivel casters Diameter 100 mm of which one has a double-stop wheel lock, 2 castors Diameter 140 mm, side projecting thus affording considerable stability
Contents: R20150006
R21010002
Parts list: Connecting square according to DIN 3120, ISO 1174, with ball locking
Internal square drive according to DIN 3120, ISO 1174, with ball catch groove
2K reversible ratchet 1/4"": According to DIN 3120 - A 6.3, ISO 1174, right-/left-handed rotation switchable by lever, push-button release, fine toothed, oval head, 2-component handle
Square plug-in handle 1/4"": 1-component handle with inner square
Socket wrench insert 1/4"" hexagon: Metric, short, design according to DIN 3124, ISO 2725
Screwdriver bit socket 1/4"" for hexagon socket screws: With pressed-in, phosphated pin
Screwdriver bit socket 1/4"" Slot, PH, PZ, TX with hole: With pressed-in, phosphated pin
Socket wrench extension 1/4""
Cross handle with sliding piece 1/4"": Design according to DIN 3122, ISO 3315
Cardan joint 1/4"": joint screwed, design according to DIN 3123 - C 6.3
2K reversible ratchet 1/2"": According to DIN 3120 - A 12,5, ISO 1174, right-/left-handed rotation switchable by lever, push-button release, fine toothed, oval head, 2-component handle
Socket wrench extension 1/2""
Cross handle 1/2"" with sliding piece Design according to DIN 3122, ISO 3315
Cardan joint 1/2"": joint screwed, design according to DIN 3123 - C 12,5
Socket wrench insert, hexagon: Metric, short, design according to DIN 3124, ISO 2725
Screwdriver bit socket 1/2"" for hexagon socket screws: With pressed-in, phosphated pin
Ring ratchet open-end wrench: According to DIN 3113, ISO 3318, ratchet head angled 15 degree, clockwise/anticlockwise rotation switchable, jaw position 15 degree, surface satin matt chrome-plated
Offset screwdriver set: Design according to DIN ISO 2936, through hardened, phosphated
Double ring wrench: Design according to DIN 838, ISO 3318, ISO 1085, ISO 10104, 5 degree cranked, chrome vanadium steel, surface satin chrome-plated
Water pump pliers: Design according to DIN 8976 Form C, longitudinally serrated gripping surfaces, with box joint, 7-way adjustable, chrome vanadium steel, powder-coated
Combination pliers: Design according to DIN ISO 5746, induction-hardened cutting edges, 2-component handle, forged
Flat-round pliers: Designed to DIN ISO 5745, straight gripping surfaces, serrated lengthwise, induction-hardened cutting edges, 2-component handle, forged
Diagonal cutters: Design according to DIN ISO 5749, slim head shape, induction-hardened, long cutting edges, 2-component handle, forged
Circlip pliers: Design to DIN 5254 Form A, straight precision points, with opening spring, DIN 471 for circlips, DIN 983
Design according to DIN 5254 form B, 90 degree angled precision points, with opening spring, DIN 471 for retaining rings, DIN 983
Design according to DIN 5256 Form C, straight precision points, DIN 472 for retaining rings, DIN 984
Design according to DIN 5256 form D, 90 degree angled precision points, DIN 472 for retaining rings, DIN 984
Engineer's hammer: Forged hammer head, made of tempered steel, impact surfaces inductively hardened, design according to DIN 1041, ash handle, lacquered handle end, ring wedge
Flat chisels, flat oval: Design according to DIN 6453, cutting edge and head ground, impact end tempered, chrome vanadium steel
Cross-cut chisels, flat-oval: Designed according to DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome vanadium steel
8-edged drift punch: design according to DIN 6458, tempered impact end, chrome vanadium steel
Punch 8-edged: Design according to DIN 7250, impact end tempered, chrome vanadium steel
Pin punch 8-edged: Design according to DIN 6450, tempered impact end, chrome vanadium steel
2C-Screwdrivers: slotted and cross-recessed PZ, made according to DIN, blade made of high-quality chrome-molybdenum steel, chrome-plated, phosphated drive tip, 2-component handle, 5-sided handle head, slotted hole in the handle
2C-Screwdrivers TX: blade made of chrome-molybdenum steel, chrome-plated, phosphated drive tip, 2-component handle, 5-sided handle head, slotted hole in handle
Digital caliper: LCD display, reset setting, roller fine adjustment, with mm/inch switchover, ground beak ends, in box incl. spare battery, with operating instructions, PC interface, locking screw, thread table on the back
Grip pliers: Longitudinally serrated gripping surfaces, with adjusting screw and release lever, one-hand operation, chrome-plated surface, chrome-vanadium steel
Half-round file: Designed according to DIN 7261, 2-component handle, power transmission gentle on the hand, with hanging hole
Measuring tape: ABS 2-component housing, with clip, nylon-coated tape measure, mm graduation, with tape advance and tape stop, with magnetic stop, accuracy class II
Cutter knife: Blade 25 mm, plastic casing, metal blade guide, one-hand operation, with 5 spare blades
(De)magnetizer: Magnetizer for screwing and gripping tools, demagnetizer for tools
Feeler gauges set: With protective handle, retractable, tapered blades, made of hardened spring steel
Bit-Box: Drive adapter with magnetic bit lock, external hexagon drive according to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box