Skip to main content
GL Series Cylindrical Lever Lock, Satin Chrome

Roll over image to zoom in

  • Product Features

  • Product Overview

  • Related Videos

  • Reviews

  • Questions & Answers

Arrow GL08SR 26D GL Series Cylindrical Lever Lock, Satin Chrome

Item #: GL08SR 26D by Arrow

See reviewsSee reviews

$111.55

/each
SAVE UP TO 11.15

Buying in bulk

Special Order*Usually ships in 1-2 weeks
QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now
Large Order Quote

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

Safe Payment
Features
  • OverDrive™ – Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when handle is locked. Built-in stops in the rose insert prevent lever from traveling beyond approximately 70 degrees.
  • Backset – 2-3/4" (69.85mm) standard. See price book for alternate backsets.
  • Latch – Stainless Steel with 1/2" (12.7mm) throw standard. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required.
  • Latch Front – Brass and stainless steel. 2-1/4" (57.15mm) x 1-1/8" (28.57mm), 1/8" (3.175mm) in 2" (50.8mm).
  • Exposed Trim – Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks.
  • Rose Inserts – Contain coil spring which is a permanent assembly within rose insert. Inside and outside rose scalps are retained by dimples that create an interference fit with the rose inserts. There are no special retention features added to the rose insert that align the scalp.
  • Strikes – Brass and stainless steel. ANSI A115.2, 4-7/8" (123.82mm) x 1-1/4" (31.75mm) curved lip strike standard.
  • Door Thickness – 1-3/8" (34.92mm) to 2" (50.8mm).
  • Handing – Non-handed. Levers operate bi-directionally.
  • Finishes – US3, US10B, US26D.
  • Packaging – 1 per box, 10 per case.
  • Warranty – Limited five year warranty.

Product Length

4.75"

Product Width

3"

Rose/Escutcheon Design

3-9/16 In. Diameter

Screws

Combination

Base Material

Brass or Bronze

Grade

ANSI/BHMA Grade 1

Thickness

1-3/8" - 2"

Hand

Not Handed

Color

Satin Chrome

Color Code

626/US26D

Function

08-Single Dummy

Package Height

3.875"

Package Length

8.75"

Package Volume

250.0585938

Package Width

7.375"

Lever/Knob Design

SR - Sierra

Package Qty

1

Product Height

3.5625"

Finish Description

Satin Chrome

Lever Style

SR-Sierra

Rose/Escutcheon Trim

Round Rose

Product Type

Cylindrical Lock

Series

GL Series

Finish

Satin Chrome

Projection

2.5313

Lever Length

4.2500

Door Thickness

1-3/4" - 2"

Bore Size

2.1250

ADA Approved

False

Application

Heavy Duty

Warranty

5 year limited

ADA Compliant

YES

Finish Family

Satin Chrome

Door Cross Bore

2.125 Inch

Standards

ANSI/BHMA A156.2; UL and CUL Listed; Federal Specification FF-H-106C

Function Family

Dummy

Product Projection

3 Inch

Trim Material

Pressure Cast Zinc (Lever)

Features

Inside and Outside Rose Inserts Shall Have Independent Heavy Strength Coil Springs Allowing Lever Handle to Move Bi-Directionally

Manufacturer Parent

Assa Abloy

Lever Length-Inches

4.25 Inch

Knob/Lever Size

4-3/4 Inch

Lever Style Family

Straight Return Lever

Sub-Series

GL08-SR-26D

Handle Type

Lever

Rose Diameter

3-9/16 Inch

Product Overview

GL Series Cylindrical Lever Locks

Arrow GL Series Grade 1 heavy duty levers offer an economically pleasing solution for ADA compliance. The GL solution is designed with the installer in mind, providing fewer subcomponents to allow for an easier to install system. Simply put, the GL Series will be your number one choice when economy is your first priority.


Certification:

All Arrow GL Series locks are UL/cUL listed for use on 3 hour, A label or lesser doors and are certified to conform to the requirements of ANSI/BHMA A156.2, Series 4000, Grade 1.

  • Federal Specification FF-H-106C
  • ANSI A117.1 Accessibility Code
  • California State Reference Code for levers returning to within 1/2" (12.7mm) of door surface


Features

  • Housing- Interlocking lever tubes are made from dichromate plated steel. The tubes are attached to the rose insert. This offers fantastic support for a ridged feel without excess movement. Standard bearing sleeves used on most other Arrow lever series are not used on the GL. Requires standard 2-1/8" (53.97mm) bore through door.
  • Thru-Bolts- Removable thru-bolts standard on GL Series
  • OverDrive™- Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when handle is locked. Built-in stops in the rose insert prevent lever from traveling beyond approximately 70 degrees.
  • Backset- 2-3/4" (69.85mm) standard. See price book for alternate backsets.
  • Latch- Stainless Steel with 1/2" (12.7mm) throw standard. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required.
  • Latch Front- Brass and stainless steel. 2-1/4" (57.15mm) x 1-1/8" (28.57mm), 1/8" (3.175mm) in 2" (50.8mm).
  • Exposed Trim- Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks.
  • Rose Inserts- Contain coil spring which is a permanent assembly within rose insert. Inside and outside rose scalps are retained by dimples that create an interference fit with the rose inserts. There are no special retention features added to the rose insert that align the scalp.
  • Strikes- Brass and stainless steel. ANSI A115.2, 4-7/8" (123.82mm) x 1-1/4" (31.75mm) curved lip strike standard.
  • Door Thickness- 1-3/8" (34.92mm) to 2" (50.8mm).
  • Handing- Non-handed. Levers operate bi-directionally
  • Warranty- Limited five year warranty