- Available in Two High Strength Formulas
- Builds Out to 2-1/2" (64 mm) without Sag
- Ideal for Large Mirrored Walls and Uneven Surfaces
- Available in 10.1 Fl. Oz. Cartridges or Gallon Cans
- Available in 10.1 Fluid Ounce Cartridges or Gallon Cans
10.1 fl. oz. (300 ml)
Gunther Extra/Build® viscosity provides for a build out of 2-1/2" (64 mm) without sag for custom mirrored walls or vanities, where construction is such that there are gaps of over 3/4" (19 mm) between the mirror and the substrate.
Notes: The following chart indicates the rate of curing for Gunther extra/build.
Approximate Percent of Maximum Strength:
@ 24 hours - 25%
@ 3 days - 50%
@ 7 days - 75%
@ 30 days - 100%
■ Curing time will depend on temperature and the amount of air to reach Gunther extra/build. A 4-inch spot will cure faster than a 6-inch spot.
■ Mounting Time - Mirrors can be mounted up to 20 minutes after application of Gunther extra/build.
■ Adjusting Time - Gunther extra/build can be adjusted for a period of 24 hours after installation, to ensure proper mirror alignment. Important Notes: *For best application results, apply Gunther extra/build in 4" diameter patties for every square foot. Not for exterior applications.
Gunther Prime and Seal provides a solid basis for better adhesion and protects against etching on the back of the mirror after it's cut.
Keep away from heat, sparks and flame. Vapors may ignite explosively. No smoking. Delete all flames, burners or ovens. Turn off heating and lights are off, and disconnect all electrical motors and appliances before use disappeared until all vapors. Prevent formation of vapor present in the open all the windows and doors. The central nervous system may be affected, as the fumes can cause dizziness, headaches and nausea. Direct contact of the skin, eyes or clothing should be avoided. Avoid breathing vapors. Repeated or prolonged inhalation can cause brain damage, nervous system, liver or the kidneys can be attacked, as it can lead to heart rhythm disturbances. ABUSE AND INHALATION OF THE INGREDIENTS MAY RESULT IN SERIOUS INJURY.
CRL, Gunther Mirror Mastics, the manufacturer or Royal Adhesives and Sealants LLC., shall not be liable for consequential damages for use of Gunther products. Damages incurred in connection with the use of Gunther products by the buyer, seller, user or any other person are strictly limited to the purchase price of the goods purchased, the customer takes full responsibility. All installation guidelines must be met. For installation instructions please refer to the installer.
CRL gives no warranty, express or implied on any mirror mastic. It is the user's responsibility to determine the mastic's suitability to different types of mirror backing and each specific installation.