Skip to main content
190S 40" x 34-3/4" US32D UL Satin Stainless Steel

Roll over image to zoom in

Hager 016933 190S 40" x 34-3/4" US32D UL Satin Stainless Steel

Item #: 016933 by Hager

UPC #: 041359169338

See reviewsSee reviews
In Stock

$147.30

/each
SAVE UP TO 14.73

Buying in bulk


QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

Features

Thickness

0.050" (1 mm)

Material

Aluminum, Brass, Bronze, Stainless Steel

Projection

2 3/4" (70 mm)

Applications

  • 6” (152 mm) CTC- 4E
  • 8” (203 mm) CTC- 4G
  • 10” (254 mm) CTC- 4J
  • 12” (305 mm) CTC- 4L

Pull Clearance

1 3/4" (45 mm)

Pull Diameter

1" (25 mm)

Slug

/trim-auxiliary/pulls/4

Fasteners

Two 1/4" - 20 thru bolts with finish washers

OriginalName

4

Notes

  • Back to Back - See Model 14
  • If ordered with tempered glass, specify glass thickness and hole size

LinkGroup

4

Handicap

2- 1/2" (64 mm) clearance available on special orders. Add prefix "H" to number (i.e. H4E)

RawJson

Dkh.Scrap.HagerV2.ProductResponse

Product Overview

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Certifications:
  • EPD
  • NFPA 80 Standards 6.4.5 Protection Plates
  • 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
  • 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
  • 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
  • Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate