Hager 190S-34X38-32D-CSK Door Protection Plate

190SDoor Protection Plate

0.050" gauge with four beveled edges

NFPA Notes:

• NFPA 80 Standards

• 6.4.5 Protection Plates 6.4.5.1

• Factory installed protection plates shall be installed in accordance with the listing of the door. 6.4.5.2

• Field installed protection plates shall be labeled and installed in accordance with their listing. 6.4.5.3

• Labeling shall not be required where the top of the protection plate is not more than 16" (406mm) above the bottom of the door.

• Note: If needing the 190S with rounded corners, please order the 196R.

Specifications: Gauge:

• 0.050" (1 mm)

Materials:

• Aluminum, Brass, Bronze, Stainless Steel

Finishes:

• US3, US4, US10, US10B, DBZ, US28, US32, US32D

Bevel:

• 4 edges

Orders:

• Furnish item #, height, width, and finish (i.e., 190S – 6" x 30", US32D).
• Plates are sized on even inches. Odd size available and priced to next larger size.
• May be ordered with countersunk holes (specify "CSK") at extra charge.

Certification:

• Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

Options:

• UL listed for US32 and US32D with screw fasteners (must specify UL stamp)

• Self-adhesive tape available on all plates

• Spanner head screws

• Torx head screws

• Round corners - specify 196R

• Wrap around side and bottom return

• 0.125" material

Product Size Options:

• Item - 190S
• B&S Gauge - 16
• US Gauge - 18
• Bevel - B4E
• Fasteners - #6 x 5/8 truss head screws