Skip to main content
790-905 93" US32D LH .1PK Satin Stainless Steel

Roll over image to zoom in

Hager 028667 790-905 93" US32D LH .1PK Satin Stainless Steel

Item #: 028667 by Hager

UPC #: 041359286677

See reviewsSee reviews
In Stock

$548.30

/each
SAVE UP TO 54.83

Buying in bulk


QTY
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

Features

Material

14 Ga. (0.075") Type 304 Stainless Steel

Fastener Size

#10-24 x 5/8" S/S Dril-Kwik® (metal frame), #1/4-32 x 3/4" S/S machine fastener (used with adjustment stud), # 7/16-20 x 1-3/8" S/S adjustment stud (metal/wood door)

Slug

/stainless-steel-continuous-hinges/concealed-leaf/790-905

Maximum Door Weight

300 lbs

Door Reinforcement

Wood - None required up to 200 lbs. For metal doors, a 1/8" (3 mm) thick reinforcement plate is recommended along the hinge edge for proper thread engagement of the adjustment studs.

Frame Reinforcement

None required to 200 lbs. Heavier weight use 16-gauge channel.

Maximum Door Length

10-'0"

Maximum Door Thickness

1-3/4"

Length

79", 83", 85", 95", 119"

Product Overview

Clearance:
9/32" minimum hinge side plus standard lockside clearance
Notes:
  • For metal doors, a 1/8" (3.2mm) thick reinforcement plate is strongly recommended along the hinge edge for proper thread engagement of the adjustment studs.
  • Any nonstandard length hinge may require a custom hole pattern based on the requested length.
  • Consult Hager Companies to address the field prep for the doors and frames.
  • Tamper resistant hospital tip available.

Optional Features:
Tamper Resistant Hospital Tips (HT), Sheared leaf, Raised Barrel (SWAGED), Wide Throw, Security Studs, Dutch Door Prep (DUTCH)
Certifications:
ANSI A51011B Grade 1 for 150-pound doors, UL
Finishes:
US32D
Length Options:
Standard and Custom
Special Features:
1/4" (6.3 mm) diameter Stainless Steel Pin. Dual 6/6 Nylon bearings between each knuckle. Door edge protection lip (both faces of door). Not recommended for doors with a beveled edge on the hinge side. 1/16" (1.6 mm) inset.
Notes:
  • For metal doors, a 1/8" (3.2mm) thick reinforcement plate is strongly recommended along the hinge edge for proper thread engagement of the adjustment studs.
  • Any nonstandard length hinge may require a custom hole pattern based on the requested length.
  • Consult Hager Companies to address the field prep for the doors and frames.
  • Tamper resistant hospital tip available.