RECENTLY VIEWED
Skip to main content
These original CRL Dry Wall Anchors are our best selling anchors because they are: Fast (no predrilling or hole preparation necessary); easy (installs with only a #2 Phillips screwdriver or bit); neat (single point self-drills a clean, small hole); secure (deep threads provide strong hold in gypsum wallboard); removable (can be easily backed out). They are available in zinc and plastic to replace plastic plugs, toggle bolts, or "Molly" type anchors for dozens of different mounting applications. Maximum fixture thickness is 3/4" (19 mm).
HOLDING VALUES (ULTIMATE LOADS) - TENSILE (PULLOUT):
AnchorWallboard Thickness
3/8" (10 mm)Wallboard Thickness
1/2" (13 mm)Wallboard Thickness
5/8" (16 mm)E-Z Plastic Lite25 Lbs. (11.3 kg)30 Lbs. (13.6 kg)40 Lbs. (18 kg)
E-Z Plastic Plus40 Lbs. (18 kg)50 Lbs. (22.7 kg)75 Lbs. (34 kg)
E-Z Zinc40 Lbs. (18 kg)50 Lbs. (22.7 kg)75 Lbs. (34 kg)
These performance values are averages obtained under laboratory conditions.NOTE: These values will change depending on age, moisture, content, and surface treatment of the drywall (gypsum material). Appropriate safety factors should be applied to these values for design purposes.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov
Features
- Our Best Selling Anchors
- Includes Screws
- Self-Drilling, One Piece Anchors for Mounting to 3/8", 1/2" or 5/8" (10, 13 or 16 mm) Thick Gypsum Wallboard
- Secure and Removable
Screw Size
#8 x 1 1/2
Type
Zinc with Screws
Brand
E-Z Ancor
Thread Type
Pan Head Phillips
Thickness
3/8, 1/2 Or 5/8 (Thick Gypsum Wallboard)
Product Overview
These original CRL Dry Wall Anchors are our best selling anchors because they are: Fast (no predrilling or hole preparation necessary); easy (installs with only a #2 Phillips screwdriver or bit); neat (single point self-drills a clean, small hole); secure (deep threads provide strong hold in gypsum wallboard); removable (can be easily backed out). They are available in zinc and plastic to replace plastic plugs, toggle bolts, or "Molly" type anchors for dozens of different mounting applications. Maximum fixture thickness is 3/4" (19 mm).
HOLDING VALUES (ULTIMATE LOADS) - TENSILE (PULLOUT):
AnchorWallboard Thickness
3/8" (10 mm)Wallboard Thickness
1/2" (13 mm)Wallboard Thickness
5/8" (16 mm)E-Z Plastic Lite25 Lbs. (11.3 kg)30 Lbs. (13.6 kg)40 Lbs. (18 kg)
E-Z Plastic Plus40 Lbs. (18 kg)50 Lbs. (22.7 kg)75 Lbs. (34 kg)
E-Z Zinc40 Lbs. (18 kg)50 Lbs. (22.7 kg)75 Lbs. (34 kg)
These performance values are averages obtained under laboratory conditions.NOTE: These values will change depending on age, moisture, content, and surface treatment of the drywall (gypsum material). Appropriate safety factors should be applied to these values for design purposes.