Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
CRL L25S10F6 L25S Series Mill Aluminum 118-1/8" Standard Square Base Shoe Drilled for 1-1/16" Glass
Item #: L25S10F6 by CR Laurence
See reviews See
reviews
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
- For 1-1/16" (25.52 mm) Laminated Tempered Glass (12 x 1.52 x 12 mm)
- Drilled and Counter Bored 5-7/8" (150 mm) Center-to-Center, or We Will Custom Drill to Your Specifications
- Typically Used as the Base Channel for Glass Railing Systems or Windscreens
- Works with LTL10X TAPER-LOC® Taper Sets
- Engineering Reports Available
- CRL Recommends Consulting with the Glass Fabricator Prior to Wet Setting Laminated Tempered Glass
- CRL Glass Railing Systems Meets NBC Load Requirements When Installed in Accordance to ICC-3842
C.T.C.
5-7/8" (150 mm)
Hole Size
13/16" (20.6 mm)
Counter Bore X Depth
1-1/4" (31.7 mm) x 1/2" (12.7 mm)
Stock Length
118-1/8" (3 m)
Holes Drilled C.T.C.
5-7/8" (150 mm)
Finish
Mill
Glazing Type
Laminated
Drilling Center to Center
5-7/8
Glazing Thickness
1-1/16
Length
118-1/8
Material
Aluminum
Finish/Color
Mill
The CRL L25S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.
GLASS SPECIFICATIONS:
For use with 1-1/16" (25.5 mm) Laminated Tempered Glass 1/2" x .06 x 1/2" (12 x 1.52 x 12 mm)
Thickness Range: .960" to 1.060" (24.4 to 26.9 mm) Will work with ASTM 1" (25.4 mm) Monolithic Tempered Glass Will not accommodate the full ASTM thickness range for 1-1/16" (27 mm) glass
Product Warning:
CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method.
All pre-drilled CRL Base Shoes have a +1/8 (3 mm)/-1/16 (1.5 mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.
.