MS International, Inc TBIANDOL1224P Bianco Dolomite Beveled 12 in. x 24 in. Polished Marble Look Floor and Wall Tile (10 sq. ft./Case)

Upgrade the look of your home with this MSI Bianco Dolomite Marble Floor and Wall Tile. The low-contrast blend of arctic white and pale gray create a classic sophisticated look. This tile works well with any color scheme, so it's a great choice for your next floor, countertop, accent wall or shower surround project.

• 10 sq. ft., 5 pieces per case; case weight 53.8 lbs.
• Grade 1 first-quality natural marble tile for floor, wall and countertop use
• 12 in. W x 24 in. L x 12.7 mm T
• Glazed polished finish with a high sheen and slight variation in tone
• P.E.I. Rating III is suitable for medium-duty residential and commercial floors including kitchens, halls, terraces and areas used more often with normal footwear and small amounts of dirt
• Impervious flooring has water absorption of less than 0.5% for indoor or some outdoor use and is frost proof
• C.O.F. greater than 0.50 is recommended for standard residential and commercial applications; skid-resistant
• Not frost-resistant
• Residential and commercial use
• Don't forget your coordinating trim pieces, grout, backerboard, thinset and installation tools
• Purchase a minimum of 10% overage to account for design cuts and patterns
• Greenguard indoor air quality certified and Greenguard children and schools certified product
• 1-year limited warranty is provided on flooring and surfacing products manufactured or distributed by MSI within the limitations explicitly outlined in the warranty statement

Proposition 65 Information

WARNING: This product can expose you to chemicals including silica which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. CAUTION: SILICA DUST HARMFUL IF INHALED. Exposure to silica dust from cutting, grinding, or polishing product can cause acute lung injury or cancer. Wet cutting methods are recommended. Use adequate dust prevention methods. Children should not be present during cutting, grinding, or polishing.