RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
See reviewsSee reviews
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov
Features
- Use with any 12 Volt or 24 Volt system
- Loads current and battery voltage in five-second intervals
- Handles up to 525 watts of solar array
- Regulated PWM output to prevent overcharging
- Protects battery from high voltage surges, short circuit, low voltage discharging
- Features overcharge protection, easy access front connection terminals and LED charge status indicators
- Discharging Current: 30A
- Charging Current: 30A
- Overcharge Protection: 14.4V 1%
- Starting Voltage 12.3V
- Over discharge: Cut-off 10.7V 1%, Resume 12.6 1%
- No load current: 10mA
- Display: LED
- Operating temperature: -13 F to 131 F (-25 to 55 )
- Altitude: Below 3.4 miles (5500m) [above 1.24 miles (>2000m) causes reduced power]
Voltage
12/24V DC
Wattage
525 Watts
Type
Controller
Warranty
Two years
Amperage
30 amps
Product Overview
This 30-Amp Charge Controller regulates the current from one or several solar panels to avoid overcharging 12-volt batteries. Any solar panel that is rated 12 watts or higher requires the use of a solar charge controller to regulate the current and voltage going to the battery. This 30 Amp Charge controller can handle up to 450 Watts of Solar array. It will automatically recognize if you are using a 12v or 24v system. Download the APP ChargePro for mobile phone monitoring and operation. Solar charge controllers are for permanent installation and should be installed close to the battery in a dry and ventilated area. Owner's Manual Additional Information