Roll over image to zoom in
Schlage ND70PD ATH 606X626 Cylindrical Lock Satin Brass
Item #: ND70PD ATH 606X626 by Schlage Commercial
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
- Handing: All ND-Series lever locksets are non-handed.
- Door Thickness: 1 5/8” to 2 1/8” (41mm–54mm) standard including Vandlgard® functions. 1 3/4” - 2” for function ND85. See accessories for spacers required for 1 3/8” doors.
- Backset: 2 3/4” (70 mm) standard. 2 3/8”, 3 3/4” and 5” (60 mm, 95 mm, 127 mm) optional.
- Faceplate: Brass, bronze or stainless steel. 1 1/8” x 2 1/4” (29 mm x 57mm) square corner, beveled.
- Lock Chassis: Zinc plated for corrosion resistance.
- Latch Bolt: Steel, 1/2” (12mm) throw, deadlocking on keyed and exterior functions. 3/4” (19 mm) throw anti-friction latch available for pairs of fire doors.
- Exposed Trim: Levers: Pressure cast zinc, plated to match finish symbols.
- Roses: Brass, bronze or zinc.
- Strike: ANSI curved lip strike 1 1/4” x 4 7/8” x 1 3/16” lip to center standard. Optional strikes, lip lengths and ANSI strike box available. See page 21.
- Cylinder & Keys: 6-pin Everest 29 S123 keyway standard with two patented nickel silver keys per lock.
- Keying Options: Interchangeable core and Primus high security cylinders. Master keying, grand master keying and construction keying.
- Warranty: Ten-year limited for all functions including Vandlgard.
Thickness
1-5/8" - 2-1/8"
Strike Number
10-025
Package Volume
372.28125
Latch Number
13-247
Color
Satin Brass
Case Width
14.625"
Function
70-Classroom Lock
Latch Type
Dead Latch (Guarded)
ANSI Function
F84 - Classroom
Hand
Not Handed
Grade
Grade 1
Fire Rated
3 Hours {A}
Secondary Finish
626/US26D
Special Marks
Conventional cylinder, Fire rated 3 Hours {A}
Key(s)
Cut
Strike Width
1-1/4"
Latch Backset Dim
2-3/4 In.
Cylinder Type
Conventional Cylinder
Lock Face Size
2-1/4 In. x 1-1/8 In.
Case Length
16.375"
Package Qty
1
Package Height
4.75
Screws
Combination
Keying
Keyed Different
Case Height
10"
Package Width
8.25
Secondary Finish Description
Satin Chrome
Bolt Protection
1/2"
Case Volume
2394.84375
Color Code
606/US4
Strike Type
ASA
Origin
Mexico
BAA Qualified
Yes
Rose/Escutcheon Design
3-7/16 In. Diameter
Base Material
Brass
Keyway
S123
Strike Height
4-7/8"
Lever/Knob Design
ATH - Athens
Package Length
9.5
Grade 1 Classroom Cylindrical Lock, Athens Lever, Conventional Cylinder, Satin Brass x Satin Chrome Finish, Non-handed
Walter Schlage invented the cylindrical lock in 1920. Since then, the Schlage Lock Company has consistently delivered innovation and continuous improvement. In that tradition, The ND Series Cylindrical Lockset is a proven, easy to install product with extensive function, keying, trim and finish capabilities that work in nearly any application. The Schlage ND Series Locksets are commonly used in Healthcare, Education, Government, Office, Retail, and other commercial applications. The ND Series has been certified Grade 1; exceeding 3-million operating cycles without failure. This provides confidence that the lock will last within any type of facility. Finally, Schlage has incorporated wire-wireless capabilities that meet the access control and security needs of every facility owner.
Proven, easy-to-install lever locks with extensive function, keying, trim and finish capabilities.
The Schlage® ND family significantly exceeds BHMA Grade 1 requirements for cycle, hammer blow, lever torque, lever pull and other tests. This means confidence that the lock will last, whether the application calls for high abuse resistance or just operation over millions of cycles—without any degradation in performance.