RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov
Features
Finish
Clear
Length
20ft.
Width
7/16"
Size
5/16" x 7/16"
Finish code
C
Application
Door Frames to Seal Top and Sides of Door
ANSI/BHMA Standards
Air Infiltration Tested, Intertek Testing (Warnock Hersey), Sound Tested- ASTM E90, BHMA Certified, Smoke Tested- UL1784, Fire Rated UL10C- Positive Pressure, Underwriters Laboratory 4L10, Greenguard Gold Certified
Substrate Type
Silicone
Features
Self-Extinguishing, Non-Toxic, Impervious to Fungus and Mildew
Product Dimension
H: 5/16" , W: 7/16"
Product Overview
PEMKO S44 AdhesiveFire and SmokeGasketing
- Designed for tighter frames.
- Demonstrates extremely low closing force.
- Seal begins compressing at 5/16". Compresses to seal up to a 1/16" gap.
- S44 is available in 17, 18, 20, 21, 25, 204 and 510 ft. coils.
- SiliconSeal is extruded from high-temperature silicone; effective between -58 degreeF and 450 degreeF.
- Self-extinguishing and non-toxic. Unaffected by sunlight, ozone and ultraviolet rays.
- Impervious to fungus and mildew; will not deteriorate under normal exposure.
- Meets FAR 25.853 Airworthiness Standards for Compartment Interiors.
- Smoke tested in accordance with UBC 7-2 and UL 1784-01; meets the requirements of NFPA 105 "Standard for the Installation of Smoke Door Assemblies and Other Opening Protectives".
- S44, S77 and S88 are air infiltration tested in accordance with ASTM E-283-04. Air infiltration is only .09 CFM / ft of crack.
- Category H - Gasketing - Smoke and draft control for positive pressure openings. Recommended products are PK33, PK55, S44, S88 and S773.
- Category H gaskets for use with listed steel frames and/or classified steel covered composite, hollow metal doors rated up to and including 3 hours; wood and plastic covered composite doors rated up to and including 1-1/2 hours; and wood core doors rated for 20 minutes without hose stream. When applied to the door and frame assembly in accordance with the manufacturers installation instruction, the assembly will comply with UBC 7-2 (1997) part II.
- Category J - Doors - gasketing that has been tested on a positive pressure fire door and frame but is not required for the door to obtain its fire door rating. Category J gasketing does not negatively affect the rating on a positive pressure door.
- Category J gaskets for use with listed steel frames and/or classified steel covered composite, hollow metal doors rated up to and including 3 hours; wood and plastic covered composite doors rated up to and including 1-1/2 hours; and wood core doors rated for 20 minutes.
Testing/Ratings:
Gasketing material for fire doors intended for aplication to listed steel frames and/or classified steel covered composite type, and hollow metal type fire doors rated up to 3 hours; wood and plastic covered composite type fire doors rated up to 1-1/2 hours; and wood core type fire doors rated up to 20 minutes.