CRL SJ110DM Portable Pressure Blaster

Item #: SJ110DM by CR Laurence

See reviews

$1,648.48 /each

SAVE UP TO 164.85

Buying in bulk

Roll over image to zoom in

CRL SJ110DM Portable Pressure Blaster

Item #: SJ110DM by CR Laurence

See reviews See reviews

$1,648.48 /each

SAVE UP TO 164.85

Buying in bulk

Special Order*Usually ships in 1-2 weeks
QTY
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

  • Cuts Faster Than Siphon Blasters
  • Easy Loading ASME Certified Tank
  • Includes Three Ceramic Nozzles

Shipping Weight

40 Lb (18.14kg)

Hold Capacity

90 To 110 Pounds

CRL Portable Pressure Blaster is prefect for a wide variety of surface preparation. It is ideally used for removing paint, rust, scale, oxidation on various surfaces. It has an impressive abrasive capacity of 90 to 110 lbs. (40.8 to 49.9 kg) provides up to 50 minutes blasting time before refills. Durable wheels and built-in handle allows for easy transport. Steel deadman shut off handle along with adjustable flow valve and pressure relieving ball valve provide the operator with complete control of abrasive blasting. The large 12" (305 mm) diameter tank has an easy-loading recessed top, and the 8" (203 mm) diameter wheels make it easily portable. The tank has a pressure gauge and a pressure relief valve set at 125 PSI (8.6 bars). The ASME Certified tank has a 1.1 cu. feet (31 l) volume capacity. Kit includes a 10' (3 m) abrasive hose, a blasting gun with an automatic shut-off if released or dropped, and two 1/8" (3.2 mm) an done 3/32" (2.4 mm) ceramic nozzles, and protective hood with hard hat. Requires a compressor that can deliver 15 CFM (7079 cm/sec)at 80 PSI (5.5 bars). Important Notes Always wear the proper safety equipment including respiratory protection when sandblasting. Failure to do so can result in serious health risks. Requires minimum 5HP compressor (not supplied DS 06/25/2016

From Manufacturer

The CRL Portable Pressure Blaster has an impressive 90 to 110 lbs. (40.8 to 49.9 kg) abrasive capacity that will provide up to 50 minutes blasting time before refills. The large 12" (305 mm) diameter tank has an easy-loading recessed top, and the 8" (203 mm) diameter wheels make it easily portable. The tank has a pressure gauge and a pressure relief valve set at 125 PSI (8.6 bars).
The ASME Certified tank has a 1.1 cu. feet (31 l) volume capacity. Kit includes a 10' (3 m) abrasive hose, a blasting gun with an automatic shut-off if released or dropped, and two 1/8" (3.2 mm) an done 3/32" (2.4 mm) ceramic nozzles, and protective hood with hard hat. Requires a compressor that can deliver 15 CFM (7079 cm/sec)at 80 PSI (5.5 bars).Important Notes

Always wear the proper safety equipment including respiratory protection when sandblasting. Failure to do so can result in serious health risks. Requires minimum 5HP compressor (not supplied)