POWR 302MV Series Primerless-to-Glass Medium Viscosity Automotive Urethane

Roll over image to zoom in

CRL PP302MV POWR 302MV Series Primerless-to-Glass Medium Viscosity Automotive Urethane

Item #: PP302MV by CR Laurence

Item Discontinued!
See reviews See reviews
The item is currently out of stock and it may or may not be restocked
OUT OF STOCK

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

  • Primerless-to-Glass Formula
  • Excellent High Strength and Rapid Curing
  • Passes or Exceeds F.M.V.S.S. 208/212/216
  • Guide to Proper Installations
  • 10.1 Fluid Ounce Tubes

Tensile Strength

1000 psi

Lap Shear Strength

550 psi

Lynx Test

Click Here

Type

Medium Viscosity Automotive Urethane

Finish

Black

Sealant Type

Urethane

Contents

10.1

Finish/Color

Black


CRL 302MV Series Primerless-to-Glass Medium Viscosity Urethane is a high quality medium viscosity, non-conductive, and primerless-to-glass polyurethane adhesive that passes or exceeds the requirements of U.S. Federal Motor Vehicle Safety Standards 212. With over 1,000 psi of tensile strength and 200 psi lap shear at ultimate cure, PP302MV is one of the safest and strongest urethanes offered for the aftermarket. These urethanes have a new Aggressive Adhesion Formula and have proven themselves to aggressively bond to all automotive glass surfaces and frits without needing a glass primer. Long term exposure testing confirms that the new formula stands up to the harshest environmental conditions.
Packaged with 15 V-Notch nozzles and four cone-shaped nozzles per case.
We are also introducing additional support products for this new series of automotive Urethanes, including CRL POWR 300 Series Urethane EPDM/PVC Primer/UV Blocker PP3UV for bonding to encapsulated parts and moldings or adding a black-out band to glass without a frit to protect the bond line from ultraviolet light. CRL POWR 300 Series Urethane Pinchweld Primer PP3MP is for application prior to bonding to bare metal scratches and rust repaired or repainted pinchwelds. You should always use PWR22 CRL Automotive Glass Cleaner to clean the glass and the bonding area of the glass to remove any contamination. By using these products, the strongest possible bond will be attained. Complete detailed instructions are printed on every cartridge and found on the Spec Data.
PP302MV is packed 24-10.1 fluid ounce (300 m) cartridges to a case. Full pallets contain 1440 total cartridges.
Product Warning:
POWR 300 Series Urethane should not be used with primers from other urethane systems. Do not store at temperatures in excess of 75°F (24°C). If product is mechanically warmed in excess 95°F (35°C) for a cold weather installation, then it must be used the same day. 9 Month Shelf Life. Aluminum cartridges have screw-on nozzles.

.