RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov
Features
Finish
Nickel
Material
Die-Cast Zinc
Door Thickness
5/8 to 13/16 in
Standards and Certifications
ANSI Grade 1
Gap
5/32 in
Door position
Full Overlay
Cabinet Thickness
3/4 in
Hinge Opening Angle
+270°
Fixing Type
Expanding Dowel
Product Overview
These institutional single-pivot hinges are engineered for demanding public environments such as schools, hospitals, and commercial spaces. Designed to carry higher loads, they ensure long-term stability under frequent use and heavy impact.
A wide opening angle of 180 degree--270 degree allows unrestricted cabinet access without risk of overextension, while the slim hinge arm makes them ideal for modular installations with adjacent drawers or pull-outs. Integrated 3D adjustment enables precise alignment in all directions, ensuring accuracy and reliability throughout the service life.
- 3D adjustability adjustability
- Module-friendly flat hinge arms
- Certified according to ANSI Grade 1
- Certified according to EN 15570, Level 3
Advantages And Benefits
Wide opening angle :
- Single-pivot hinges allow for opening angles of 180 degree to 270 degree.
- This makes it easier to access all of the cabinet interior.
- No damage is caused by opening the door too widely.
Flat hinge arm :
- The 5-7 mm flat hinge arms only take a minimum of space.
- This makes them ideally suited for modular cupboards: Drawers and pull-out units can be installed without problem.
Strong :
- Single-pivot hinges are very sturdy and are carry a much higher load per hinge.
- These hinges are suitable for heavily used cabinets and doors.
3D Adjustment :
- This makes it quick and easy to adjust the doors in every direction.
Application
- Gym
- Hospital
- Daycare
- Libary
- School
- Institution
- Restaurant
Important Information
A complete hinge consists of a hinge arm and a door part. Each part has its own product number. The matching door part can be found above in the required products.
A wide opening angle of 180 degree--270 degree allows unrestricted cabinet access without risk of overextension, while the slim hinge arm makes them ideal for modular installations with adjacent drawers or pull-outs. Integrated 3D adjustment enables precise alignment in all directions, ensuring accuracy and reliability throughout the service life.
- 3D adjustability adjustability
- Module-friendly flat hinge arms
- Certified according to ANSI Grade 1
- Certified according to EN 15570, Level 3
Advantages And Benefits
Wide opening angle :
- Single-pivot hinges allow for opening angles of 180 degree to 270 degree.
- This makes it easier to access all of the cabinet interior.
- No damage is caused by opening the door too widely.
Flat hinge arm :
- The 5-7 mm flat hinge arms only take a minimum of space.
- This makes them ideally suited for modular cupboards: Drawers and pull-out units can be installed without problem.
Strong :
- Single-pivot hinges are very sturdy and are carry a much higher load per hinge.
- These hinges are suitable for heavily used cabinets and doors.
3D Adjustment :
- This makes it quick and easy to adjust the doors in every direction.
Application
- Gym
- Hospital
- Daycare
- Libary
- School
- Institution
- Restaurant
Important Information
A complete hinge consists of a hinge arm and a door part. Each part has its own product number. The matching door part can be found above in the required products.