To remove the Premier 133505 Balancer Assembly, follow these general steps—though keep in mind that exact instructions may vary slightly depending on your faucet model: 1 - Turn off the water supply – Always start by shutting off both hot and cold water lines under the sink. 2 - Relieve pressure – Open the faucet to drain any remaining water. 3 - Access the faucet body – Depending on your setup, you may need to remove the handle and escutcheon to reach the balancer assembly. 4 - Disconnect the balancer – The balancer is typically connected to the faucet’s valve body and spray hose. Unscrew or unclip it carefully. 5 - Remove mounting hardware – If the balancer is secured with screws or clips, remove them using a screwdriver or pliers. 6 - Extract the assembly – Gently pull the old balancer out. If it’s stuck, a light wiggle or twist can help loosen it