The DynaTrap DT2000XLP and DT2030 Outdoor Insect Traps are designed to attract and trap flying insects using a combination of UV light and CO₂ generated by a special titanium dioxide-coated surface. Here’s a quick guide to get you started: Setup & Operation 1 - Unpack the unit and remove any cardboard inserts from the retaining cage. 2 - Assemble the air damper inside the retaining cage with the crossbar facing up. Align the notches and twist the trap clockwise to lock it in place. 3 - Place or hang the trap 20–40 feet away from where people gather, ideally in a shaded area. 4 - Plug it in and switch it to the “ON” position (located under the upper housing). Let it run continuously—it’s most effective when left on 24/7, especially at night when insect activity peaks.