RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
Reeve Store Equipment Company 705062G Concealed "T" Standard - No. 704 and 705
Item #: 705062G by Richelieu Hardware
Brand: Reeve Store Equipment Company
See reviewsSee reviews
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov
Features
Material
Steel
Length
72 in
Gauge
14
Slot Width
3/16 in
Width
1 1/2 in
Color/Finish
Zinc
Mounting
Concealed
"T" Height
13/16 in
Slot Adjustment
2 in
Brand
Reeve
Product Overview
1/8" thick steel
- On center dimension from countersunk screw hole to countersunk screw hole is 6" staggered side-to-side
- Requires screw #10
- Loose fixtures and perimeter
Application
INSTALLATION
All wall mounted standards should be installed with the stamp right-side up, the widest margin at the bottom and typically a half slot at the top. Before mounting to the wall, line up each standard using the bottom of each bottom slot as the guide. Once aligned, make sure to fasten to a secure wall stud (or equivalent) using appropriate screws. Make sure to utilize each screw hole.
All recessed/concealed "T"-standards should be mounted right-side up as shown by the "top" stamp. Before mounting, line up each standard using the bottom of each bottom slot as the guide. Once aligned, make sure to fasten to a secure wall stud (or equivalent blocking) using appropriate screws (see Drawing A). Make sure to utilize each screw hole. Please note that a minimum 3/it by 1/s" notch is required in the stud or blocking to allow installation of brackets.
- On center dimension from countersunk screw hole to countersunk screw hole is 6" staggered side-to-side
- Requires screw #10
- Loose fixtures and perimeter
Application
INSTALLATION
All wall mounted standards should be installed with the stamp right-side up, the widest margin at the bottom and typically a half slot at the top. Before mounting to the wall, line up each standard using the bottom of each bottom slot as the guide. Once aligned, make sure to fasten to a secure wall stud (or equivalent) using appropriate screws. Make sure to utilize each screw hole.
All recessed/concealed "T"-standards should be mounted right-side up as shown by the "top" stamp. Before mounting, line up each standard using the bottom of each bottom slot as the guide. Once aligned, make sure to fasten to a secure wall stud (or equivalent blocking) using appropriate screws (see Drawing A). Make sure to utilize each screw hole. Please note that a minimum 3/it by 1/s" notch is required in the stud or blocking to allow installation of brackets.