RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
Richelieu Hardware BP5162G Countertop Fastener
Item #: BP5162G by Richelieu Hardware
See reviewsSee reviews
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
Finish
Zinc
Material
Steel
Center to Center
2 to 3 1/2 in
Drilling Diameter
1/4 in
Area of Activity
Preparation
Product Dimensions - Length
4 in
Packaging Format
Bag of 2 units
Solutions
Countertops and Accessories
Product Overview
Ideal to join countertop pieces together, renovation is definitely no longer an issue with this tool.
Advantages And Benefits
- Applies even, controlled pressure between joint members, eliminating twisting and buckling.
- Easy to install.
- Adjustable and dismountable if necessary.
Important Information
- Designed for wood 3/4" thick.
Application
Installation
1. Drill 7/8 inch holes from back side in each piece to accommodate tightening nut and locking sleeve. Drill 7/16 inch holes in edges of both pieces for draw bolt.
2. Insert tightening nut in 7/8 inch hole facing threaded end towards the joint. Insert draw bolt and thread into nut.
3. Join both wood members. Insert locking sleeves in the remaining 7/8 inch hole so that the slotted sleeve engages the rounded portion on bolt.
4. Tighten nut with tightening tool or nail set. Each pound of pressure on the tightening tool exerts 500 pounds of force on the joint.
Advantages And Benefits
- Applies even, controlled pressure between joint members, eliminating twisting and buckling.
- Easy to install.
- Adjustable and dismountable if necessary.
Important Information
- Designed for wood 3/4" thick.
Application
Installation
1. Drill 7/8 inch holes from back side in each piece to accommodate tightening nut and locking sleeve. Drill 7/16 inch holes in edges of both pieces for draw bolt.
2. Insert tightening nut in 7/8 inch hole facing threaded end towards the joint. Insert draw bolt and thread into nut.
3. Join both wood members. Insert locking sleeves in the remaining 7/8 inch hole so that the slotted sleeve engages the rounded portion on bolt.
4. Tighten nut with tightening tool or nail set. Each pound of pressure on the tightening tool exerts 500 pounds of force on the joint.