RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
Richelieu Hardware MAK03026 Portable Edgebander
Item #: MAK03026 by Richelieu Hardware
See reviewsSee reviews
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
Voltage
127 V
Power
1.3 W
Weight
114 lb
Width
3 in
Product Overview
The Portable Edgebander is designed for convenience, portability, and affordability. It features a hot melt glue applicator for use on PVC, ABS, paper, and wood veneer edgebanding that is not pre-glued.
Advantages And Benefits
- Easy and fast setup
- Precise cutting of the tape with integrated manual cutter
- Tape support for the tape roll
- Inner guide to help align the workpiece before the glue spindle
- Tape guide to ensure alignment of tape and workpiece
- Rubber spindle guides the tape onto the workpiece at a set speed
- Back rolls provide pressure points that help bond the glue and the edgebanding tape
- Table guide to help move the workpiece easily over the table
- Retractable legs make it portable
- Can fit in a standard car trunk for easy transportation
- Self centering plate that locks in tape.
- Variable speed controller
- 3mm guillotine cutter
- CA/UL rated with upgraded switches and electronics
Application
A spiral glue bar raises the glue from the glue pot and flows back down, similar to a fondue fountain.
Important Information
- Maximum edgebanding thickness of 1/8 in (3 mm) and maximum width of 3 in (76 mm)
- Required glue works in the range of 266 F to 356 F (130 C to 180 C)
- The glue pot has a capacity of 1.5 lb (680 g), comes with 1.5 lb (680 g) of glue, and heats in 15 minutes
Technical information:
- Tape thickness: 1/64 in to 5/16 in (0.3 mm to 2 mm)
- Max. tape width: 3 in (76 mm)
- Feeder speed: 18 ft (5486.4 mm)/min
- Power: 1300 Watts
- Motor: 24V
- Volts/amps: 110 V / 10 A
Advantages And Benefits
- Easy and fast setup
- Precise cutting of the tape with integrated manual cutter
- Tape support for the tape roll
- Inner guide to help align the workpiece before the glue spindle
- Tape guide to ensure alignment of tape and workpiece
- Rubber spindle guides the tape onto the workpiece at a set speed
- Back rolls provide pressure points that help bond the glue and the edgebanding tape
- Table guide to help move the workpiece easily over the table
- Retractable legs make it portable
- Can fit in a standard car trunk for easy transportation
- Self centering plate that locks in tape.
- Variable speed controller
- 3mm guillotine cutter
- CA/UL rated with upgraded switches and electronics
Application
A spiral glue bar raises the glue from the glue pot and flows back down, similar to a fondue fountain.
Important Information
- Maximum edgebanding thickness of 1/8 in (3 mm) and maximum width of 3 in (76 mm)
- Required glue works in the range of 266 F to 356 F (130 C to 180 C)
- The glue pot has a capacity of 1.5 lb (680 g), comes with 1.5 lb (680 g) of glue, and heats in 15 minutes
Technical information:
- Tape thickness: 1/64 in to 5/16 in (0.3 mm to 2 mm)
- Max. tape width: 3 in (76 mm)
- Feeder speed: 18 ft (5486.4 mm)/min
- Power: 1300 Watts
- Motor: 24V
- Volts/amps: 110 V / 10 A