Richelieu Hardware WEBKIT1242935Click To Copy SCORRI FLAT 10 Sliding Door System - Weight Capacity per Panel: 10 kg

Height adjustment cam
The SCORRI FLAT 10 sliding door system is designed for cabinet and closet doors for three different weight capacities: 22 lb (10 kg), 66 lb (30 kg), and 110 lb (50 kg).
Features:
- Top hung running sliding system for inset applications
- Rear surface mount suspension plate with height adjustment cam
- Hardware for wood doors 5/8 in (16 mm) to 3/4 in (20 mm) thick
- Concealed track stoppers with retaining device
- Anti-lift pin for secure installation
- Choose from a selection of single and double surface mount tracks
- Single and double tracks can be mounted side by side for triple bypassing applications
- Simple and flexible installation
- Smooth operation
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove 10 mm by 9 mm at the bottom of the door for bottom guide. Drill without going through a 20 mm diameter by 10 mm deep hole similar to a European style concealed hinge, offset as per the instructions.
Ideal solution for residential and commercial applications for pantries, furniture, bookshelves, wardrobes, armoires, closets, walk-in closets, and storage.
Advantages And Benefits
- Top hung running sliding system for inset applications
- Rear surface mount suspension plate with height adjustment cam
- Concealed track stoppers with retaining device
- Anti-lift pin for secure installation
- Single and double tracks can be mounted side by side for triple bypassing applications
Important Information
- IMPORTANT: Cut a groove 10 mm by 9 mm at the bottom of the door for bottom guide. Drill without going through a 20 mm diameter by 10 mm deep hole similar to a European style concealed hinge, offset as per the instructions.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Use metric dimensions for greater accuracy during installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
Disclaimer
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.