RECENTLY VIEWED
Skip to main content
This unique CRL Top Channel is designed to fit into the pocket created by the D1637M cleat, which is attached to the wall at the top portion of the mirror. When used with a bottom FHA J-Bar, the CRL Mirror Mount System affords the installer a neat, trim way to mount mirrors with a narrow 5/16" (7.9 mm) frame. The unique offset profile of the cleat in conjunction with the top cap and the J-Bar helps keep moisture from being trapped behind the mirror, while also concealing screws and support hardware.
Hint: Closed ends can be created by trimming back a portion of the channel, and bending back the front flaps to close off the ends.
NOTE: Not recommended for schools, hospitals, or institutions where mirror edges should be protected on all four sides.
SPECIFICATIONS:
Material: 6063-T5 Aluminum Alloy
Thickness: .050 (1.27 mm)
Stock Length: 12 ft (3.66 m)
Typical Use: At the top of a mirror. Fits in the pocket created by the D1637M Cleat.
Product Warning:
Stock lengths must ship common carrier unless specifically cut for UPS shipment.
Not recommended for schools, hospitals or institutions where mirror edges should be protected on all four sides.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
CRL D1638A Satin Anodized Top Channel 144" Stock Length
Item #: D1638A by CR Laurence
See reviewsSee reviews
In Stock
$100.57
/stock lengthSAVE UP TO 10.06
Buying in bulk
QUICK SHIPPING*Usually ships in 1 business dayIn stock: 160 units available
QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See HowWatch Now
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
- Mirror Mount System Made from Three Easy-to-Use Extrusions
Length
12' (3.66 m)
Type
Top Channel
Finish
Satin Anodized
Product Overview
This unique CRL Top Channel is designed to fit into the pocket created by the D1637M cleat, which is attached to the wall at the top portion of the mirror. When used with a bottom FHA J-Bar, the CRL Mirror Mount System affords the installer a neat, trim way to mount mirrors with a narrow 5/16" (7.9 mm) frame. The unique offset profile of the cleat in conjunction with the top cap and the J-Bar helps keep moisture from being trapped behind the mirror, while also concealing screws and support hardware.
Hint: Closed ends can be created by trimming back a portion of the channel, and bending back the front flaps to close off the ends.
NOTE: Not recommended for schools, hospitals, or institutions where mirror edges should be protected on all four sides.
SPECIFICATIONS:
Material: 6063-T5 Aluminum Alloy
Thickness: .050 (1.27 mm)
Stock Length: 12 ft (3.66 m)
Typical Use: At the top of a mirror. Fits in the pocket created by the D1637M Cleat.
Product Warning:
Stock lengths must ship common carrier unless specifically cut for UPS shipment.
Not recommended for schools, hospitals or institutions where mirror edges should be protected on all four sides.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.