RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov
Features
- Creates an impermeable barrier against water intrusion
- Excellent chemical and solvent resistanc
- Good choice for coating bilges
- High-build formula means fewer coats needed
- Longer window between coats makes application easier
- Fast-drying formula reduces labor and yard time
Capacity
1 Gallon (1/2 Gallon Primer; 1/2 Gallon Catalyst)
Type
High Build Epoxy Primer
Color
Gray
Application Method
Brush , Roller , Spray
Cure Time
To Recoat: 3 Hours; To Touch: 2 Hours
Aluminum Safe
Aluminum Safe
Biocide
No Biocide
Copper Free
Copper Free
Product Overview
Using Tuff Stuff LOW VOC Epoxy Primer, you can create a barrier coat in as little as two days! Tuff Stuff LOW VOC Epoxy Primer complies with rigid VOC limits set by the California Air Quality Management Board and offers a Low VOC alternative when applying water barrier or corrosion protection. More than a simple primer, Tuff Stuff LOW VOC Epoxy Primer is a multi-purpose, high-build, two-part epoxy that in addition to use as a universal metal primer can be used to repair fiberglass blisters and create a bottom paint-ready barrier coat in as little as two days. Using microsheet silicate technology, Tuff Stuff seals out water with millions of overlapping microscopic sheets that provide an impermeable barrier against water penetration. In addition to blister prevention on fiberglass, Tuff Stuff LOW VOC Epoxy Primer can be used as a bilge coating, because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal. Tuff Stuff creates an overlapping barrier to eliminate any direct path for water migration. Tuff Stuff LOW VOC Epoxy Primer can be used on aluminum, bronze, stainless steel, cast iron and lead, above and below the waterline, which makes it a great choice for priming props, shafts, keels, trim tabs, thru hulls and lower units. Not for sale in States where prohibited by law.