RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov
Features
- Stainless steel case
- Aluminum tank
- Rear-located heat exchanger ports
- 6-gallon capacity
- Multiple versions to suit your installation
- Available for 120V and 240V
- Hold down brackets welded to inner tank for strength
- Integrated pressure relief valve for safety
- Pressure relief valve drain tube included
- Ignition-protected design
- Magnesium anode (available separately) strongly recommended to prevent galvanic corrosion of tank
ISO Approved
UL Approved
Size
Cold/Hot In/Out: 3/4" NPT , Engine Coolant In/Out: 3/4" (for Heater Hose); 1/2" Drain
Amperage
12.5 Amps at 120 Volts
Dimensions
13" Width x 13" Height x 19" Depth
Material
Stainless Steel
Capacity
6 gallons
Voltage
120 volts
Product Overview
Enjoy hot water on your boat with a dependable Seaward Marine Water Heater. Heat water dockside with 120V AC power or when underway, using engine heat. This water heater features an ignition-protected design, cladded aluminum tank, dual-wall heat exchanger and stainless steel case. Heat exchanger ports are located at the "Rear", opposite the side as the electrical box and cold in/hot out ports. To protect against galvanic corrosion and extend tank life, use of a magnesium anode is highly recommended. For installation and maintenance, see the Seaward Water Heater Owner's Manual. NOTE: Other Seaward Water Heater options include a choice of a galvanized steel, stainless steel or epoxy-coated aluminum case. Depending on the model, heat exchanger ports can be located at the "Front" or at the "Rear". See the full selection of Seaward Water Heaters.