Seco-Larm SK-1011-SDQClick To Copy Indoor Access Control Keypad

SK-1011-SDQIndoor Access Control Keypad

1,000 Users, 1 relay

Features:

• 1,000 Users. Codes may be 4~8 digits
• Output –Form C relay, 1A@30VDC, 1,000 users

• Output can be programmed to activate for up to 99,999 seconds (nearly 28 hours)

• Super user code gives admin access to keypad

• Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)

• Programmable egress input with optional warning alarm and delayed egress

• Real-time clock to auto-disable access at specific times

• Up to 50 (01~50) duress codes

• 12~24 VDC/VAC Auto-adjusting operation

• All features are programmed directly from the keypad
• No need for an external programmer

• Indoor keypad

• Mounts to a standard single-gang back box
• (surface-mount back box included)

• Durable and attractive stainless steel faceplate

• Tamper output: N.C. Dry contact, 50mA@24VDC max.

Specifications: Operating voltage:

• 12~24 VDC/VAC

Current draw (at 12VDC):

• Standby - 15mA
• Keypress - 30mA
• Output 1 active - 55mA
• Total max current draw - 90mA

Output:

• #1 –Form C - 1A@30VDC
• Tamper - 50mA@24VDC

Egress input:

• N.O. Ground

Operating temperature:

• -4°~158° F(-20°~70° C)

Operating humidity:

• 5~95% Non-condensing

Dimensions (including back box):

• 4 5/8" x 2 7/8" x 1 1/2"
• (117x73x38 mm)

Weight:

• 6-oz (170g)

Connection Terminals: Tamper N.C.:

• Tamper switch output, N.C. contact, max.50mA@24VDC. Connect to the N.C. 24-hour protection zone of an alarm if needed.

12~24 VAC/VDC:

• Connect to a 12~24 VAC/VDC power supply.
• Observe polarity.

Output 1 N.C.:

• Output. NO/NC/COM, relay output, max. 1A@30VDC

Output 1 COM:

• Output. NO/NC/COM, relay output, max. 1A@30VDC

Output 1 N.O.:

• Output. NO/NC/COM, relay output, max. 1A@30VDC

Egress In:

• N.O. Pushbutton contact to ground.
• Press button to initiate door unlock output.

Keypad Sounds and Amber LED: Steady:

• Red LED (Left) - Output inhibited
• Amber LED (Center) - Programming mode
• Green LED (right) - Output activated

Flashing:

• Red LED (Left) - Output inhibit paused
• Amber LED (Center) - Standby mode
• Green LED (right) - ---

Keypad Sounds and Amber LED: In programming mode:

• Buzzer Tones - ---
• Amber LED Flashes - On

Successful key entry:

• Buzzer Tones - 1 Beep
• Amber LED Flashes - 2 Flashes

Successful code entry:

• Buzzer Tones - 2 Beeps
• Amber LED Flashes - 2 Flashes

Unsuccessful code entry:

• Buzzer Tones - 5 Beeps
• Amber LED Flashes - 5 Flashes

DAP Jumper not replaced:

• Buzzer Tones - Continuous beeps
• Amber LED Flashes - Continuous flashes

In standby mode:

• Buzzer Tones - ---
• Amber LED Flashes -

Output relay active:

• Buzzer Tones - 1-Second beep
• Amber LED Flashes -